Home / RO Booster Pumps

RO Booster Pumps

Reverse osmosis (RO) booster pumps are used to increase water pressure when it is less than 50 psi for RO water filtration systems to produce quality water.
Loading facets...
No results found.
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Loading
Page

Want to learn more?

What is an RO booster pump?

An RO booster pump is used when the normal water pressure feeding an RO system needs to be increased or boosted. The efficiency of an RO booster pump depends on the incoming pressure of the feed water. The typical reverse osmosis system requires at least 50 psi feeding the system to function properly. If the water pressure is below 50 psi, the system will produce less water at a lower quality.

How do you know if you need an RO booster pump?

First, find out the pressure of your city water supply. Reverse osmosis systems usually operate under 40-60 psi of pressure. If your water pressure is lower than this, you may need a booster pump. Even if your pressure does meet the requirements, a booster pump may still help you receive satisfactory water flow. If you let your RO system run with low pressure, the system will:

  • Produce less water.
  • Not filter as thoroughly.
  • Fill the storage tank slowly.
  • Waste more water.

Learn more: How reverse osmosis booster pumps work.

How do I test my home’s water pressure?

You can test your home’s water pressure with a pressure gauge by following these steps:

  1. Turn off all water outlets in your home.
  2. Find a test outlet to use. This can be an outdoor spigot, a washing machine’s cold water line, or the closest outlet to your well’s pressure tank if your home uses well water.
  3. Screw on the pressure gauge until it seals with the outlet.
  4. Turn on the water to test its pressure.

Benefits of an RO Booster Pump

  • More efficient RO system
  • High-quality water
  • Less water wasted
  • More money saved

If you need to boost the water pressure in your home or want to know more about booster pumps, then visit our water booster pumps collection.

What is the Best RO Booster Pump?

The best reverse osmosis pump is not the same for everyone. The pump you purchase should suit the needs of your system. The number of gallons per day (GPD) your RO system produces dictates which pump you should use. For optimal performance at the smallest cost, match the ratings of your booster pump to the output of your RO unit.

How do I install a booster pump?

You can install a reverse osmosis booster pump yourself by following these steps:

  1. Empty the storage tank.
  2. Turn off the water supply and open the connected faucet.
  3. Mount the pump inside the bracket. Ensure there is ample space around the pump to route the tube if you are not using a bracket.
  4. Cut the tube that runs between the tank and the RO system.
  5. Insert the pressure switch.
  6. Connect the wires from the pump and transformer to the pressure switch.
  7. Turn the water supply line on.
  8. Plug in the booster pump.
  9. Turn the valve on the storage tank on.

 

To explore more about reverse osmosis systems, explore our blog: What Is a Reverse Osmosis System? | How to Maintain Your Reverse Osmosis System | What Is a Reverse Osmosis Tank?