Home / Pumps & Motors / RO Booster Pumps / Aquatec CDP 8800 Pressure Boost Pump 8852-2P01-T421 160 PSI Bypass, 3/8 JG, 24 VAC

Aquatec CDP 8800 Pressure Boost Pump 8852-2P01-T421 160 PSI Bypass, 3/8 JG, 24 VAC

Part Number: 8852-2P01-T421
Your price:
Aquatec 8800 Series Pumps are used in RO systems with flow rates greater than 50 GPD. Reverse osmosis systems require pressure to work properly. A booster pump is suggested for applications where the feed water pressure is low, and where there are high levels of Total Dissolved Solids (TDS) in the water. The 8852-2P01-T421 is designed for operation with a tank shut-off switch (PSW), which shuts off the RO booster pump when the storage tank becomes full. In under-counter RO systems the PSW can be coupled with an Electronic Shut-Off valve (ESO) in order to shut off the feed supply so the system does not waste water.

  • Outstanding toughness, durability
  • EMI/RFI electronic noise suppression
  • Expels trapped air and eliminates "air locks"
  • Pumphead can be mounted up or down
  • Improved venting system removes moisture
  • Corrosion resistant exterior
  • Connections: 3/8" QC
  • Designed for 15,000+ operating hours
  • Outlet pressures up to 125 PSI
  • Extremely quiet operation, less than 52 DBA
  • Runs dry without damage
  • Self-priming, 60 inch lift
  • Low voltage (24V) for maximum safety
Recommend Accessories:
  • 8800 Series Transformer 120V/24VAC (US) - (required) connects pump to electrical outlet to provide power
  • Tank Pressure shut-off switch w/ wire harness - shuts off booster pump when RO tank is full
  • Electronic Shut-off Solenoid (ESO) Valve w/ QC fittings - connects to tank pressure shut-off switch to close off the feed water source when RO tank is full
  • Wire harness assembly - required when using electronic shut-off valve

California residents Prop 65 Warning
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov