Flowmatic

Big-Bubba Non-Metallic Filter Housing

Part Number: BBH-150

In Stock

out of stock

In Stock

$565.99


The Big-Bubba filter housings are made of rugged glass-reinforced polypropylene so they will not chip, rust, or dent. And because all wetted surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications.

Big-Bubba filters are an economical replacement for stainless steel filtration equipment because of their non-metallic construction and today's high cost of stainless steel. Big-Bubba filter have two outlets on opposite sides to allow more flexibility with piping configurations. Filter may be installed inline or piping may come from the same direction. A plug is provided for the outlet, if not used. 

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Height (Inches)

40 Inches

Approx Width (Inches)

12 Inches

Details

Cap Color

Black

Color / Finish

Black

Flow Rate

150 Gallons Per Minute

Housing Material

Polypropylene

Inlet/Outlet Size

2" FNPT

Max Operating Pressure

125 PSI

Max Operating Temperature

175 Degrees Fahrenheit

O Rings

EPDM

Type

Commercial


Big-Bubba





The Big-Bubba filter housings are made of rugged glass-reinforced polypropylene so they will not chip, rust, or dent. And because all wetted surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications.

Big-Bubba filters are an economical replacement for stainless steel filtration equipment because of their non-metallic construction and today's high cost of stainless steel. Big-Bubba filter have two outlets on opposite sides to allow more flexibility with piping configurations. Filter may be installed inline or piping may come from the same direction. A plug is provided for the outlet, if not used. 

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Height (Inches)

40 Inches

Approx Width (Inches)

12 Inches

Details

Cap Color

Black

Color / Finish

Black

Flow Rate

150 Gallons Per Minute

Housing Material

Polypropylene

Inlet/Outlet Size

2" FNPT

Max Operating Pressure

125 PSI

Max Operating Temperature

175 Degrees Fahrenheit

O Rings

EPDM

Type

Commercial

Documentation
Big-Bubba

Reviews