PAE TankPAC TP-19P Reverse Osmosis Storage Tank Plastic Protective Shell Over Steel Tank 5 Gal

PAE TankPAC TP-19P 5 Gal Reverse Osmosis Storage Tank Plastic Protective Shell Over Steel TankShow Picture 1Show Picture 2Show Picture 3
Mouse over to view larger image.
You might like:

NSF Certified  BPA Free 

Model: TP-19P
Part Number: ROT-5P
Alt. Part Number: TP-19P, TKE-5000P, RO-145P
In Stock, Ready to Ship!
MSRP: $82.43
Price: $58.88 
Select Additional Options
Parker LIQUIfit LFPP4VFE4 Valve Female Elbow - 1/4 QC x 1/4 FPT +$5.09
Parker PP6VFE4-MG Valve Female Elbow - 3/8 QC x 1/4 FPT +$6.55
Reverse Osmosis Sanitizing Maintenance Kit +$3.75
Tank Pressure Gauge (0-20 psi) +$8.79

PAE TankPAC TP-19P Reverse Osmosis Storage Tank Plastic Protective Shell Over Steel Tank 5 Gal

The TankPAC TP-19P RO Tank is a steel five-gallon reverse osmosis tank with a polypropylene outer and inner layer. The TP-19P is constructed using FDA approved materials and has been extensively tested to ensure quality. This tank is also known as the ROT-5P.

  • Steel tank wrapped in a plastic polypropylene shell
  • Post-cured butyl rubber diaphragm
  • Inlet/Outlet size: 1/4" MPT
  • Capacity: 5 gallons
  • Maximum working pressure: 100 psi
  • Pre-charged at 6 psi
  • Max temperature: 104°F

PAE TankPAC TP-19P RO Tank Specifications
Tank Volume Comparison Chart

Reverse Osmosis Tank Maintenance and Accessories:

A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.

For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.

The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Tank Specifications
RO Water Storage
5 Gallons
6 psi
1/4" MPT
15.8 "
11 "
4.9 lbs
Operating Conditions
104 °F
100 psi
Polypropylene, Steel
Butyl Rubber
NSF Certified to Standard 58
Mouse over for more information.