Watts

Watts Flowmatic FMR05-MT-AG 5 Stage RO System 50 GPD - With Metal Tank

Part Number: FMRO5-MT-AG

Alt. Part Number: 500396, FMR05-MT-AG-FW, 161074|ERP500-01

In Stock

out of stock

In Stock

$184.99

Features:
  • Contaminant reduction processes: membrane separation, activated carbon absorption, and conventional fltration
  • Contaminants removed: barium, cadmium, chromium, lead and mercury; radium 226 / 228, selenium, cysts, chlorine, salts, turbidity and more!
  • System includes: faucet, filters, 4.4 gallon tank, installation kit with the purchase of the RO system
  • Installation Kit: 3/8" drain saddle, filter wrench, 1/4" piercing saddle valve, 1/4" tank valve, tubing and teflon tape
  • Filter/membrane replacement: filters should be replaced every 6 months to 1 year depending on the quality of your water. The Filmtec reverse osmosis membrane should be replaced every three years, depending on the quality of your water.
*While the piercing saddle valve and drain saddle provided with this system are technically adequate to install this reverse osmosis system, we suggest upgrading to a drain line adapter and angle stop adapter valve. These inexpensive parts (listed below) make the installation and maintenance of your RO system much quicker and easier.


Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.
Installation Parts Included
Drain Adapter  Piercing saddle valve w/ 1/4" compression fitting
Feed Supply Adapter Drain saddle w/ 3/8" JACO plastic compression fitting

Suggested Installation Parts (Sold Separately)
Drain Adapter DLA-12-38 JG Drain Line Adapter
Feed Supply Adapter JG Angle Stop Adapter Valve


Details

Capacity

4.4 Gallons

Cartridge Style

Drop-in Cartridge

Connections

1/4"; Jaco Fittings; 3/8"

Faucet Type

Standard Air Gap Faucet

Outlet Size

1/4"

Type

5 Stage

Valve Type

Peircing Saddle Valve

Carbon Postfilter

5 Micron

Carbon Prefilter

5 Micron

Membrane Type

1 every 3 years

Port Size

1/4"

Warranty & Certifications

Certifications

NSF/ANSI 42


Watts




Features:
  • Contaminant reduction processes: membrane separation, activated carbon absorption, and conventional fltration
  • Contaminants removed: barium, cadmium, chromium, lead and mercury; radium 226 / 228, selenium, cysts, chlorine, salts, turbidity and more!
  • System includes: faucet, filters, 4.4 gallon tank, installation kit with the purchase of the RO system
  • Installation Kit: 3/8" drain saddle, filter wrench, 1/4" piercing saddle valve, 1/4" tank valve, tubing and teflon tape
  • Filter/membrane replacement: filters should be replaced every 6 months to 1 year depending on the quality of your water. The Filmtec reverse osmosis membrane should be replaced every three years, depending on the quality of your water.
*While the piercing saddle valve and drain saddle provided with this system are technically adequate to install this reverse osmosis system, we suggest upgrading to a drain line adapter and angle stop adapter valve. These inexpensive parts (listed below) make the installation and maintenance of your RO system much quicker and easier.


Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.
Installation Parts Included
Drain Adapter  Piercing saddle valve w/ 1/4" compression fitting
Feed Supply Adapter Drain saddle w/ 3/8" JACO plastic compression fitting

Suggested Installation Parts (Sold Separately)
Drain Adapter DLA-12-38 JG Drain Line Adapter
Feed Supply Adapter JG Angle Stop Adapter Valve

Details

Capacity

4.4 Gallons

Cartridge Style

Drop-in Cartridge

Connections

1/4"; Jaco Fittings; 3/8"

Faucet Type

Standard Air Gap Faucet

Outlet Size

1/4"

Type

5 Stage

Valve Type

Peircing Saddle Valve

Carbon Postfilter

5 Micron

Carbon Prefilter

5 Micron

Membrane Type

1 every 3 years

Port Size

1/4"

Warranty & Certifications

Certifications

NSF/ANSI 42

Documentation
Watts

Reviews