Watts

Watts Big-Bubba Pleated Cartridge, 50 micron

Part Number: BBC-150-P50

In Stock

out of stock

In Stock

$211.66

The Watts Big-Bubba Pleated Filter Cartridge melt blown polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances and when chemical resistance may be a requirement.

Features:
  • 50 Micron
  • Double O-Ring Seals
  • Jumbo Cartridge Filters

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.



Weight & Dimensions

Approx Length (Inches)

26-1/4" (66.7 cm)

Box Dimensions

7x6.75x31.625

Box Quantity

1

Weight (lbs)

7

Details

Capacity

As Needed

Initial Pressure Drop

30 PSI Differential

Max Temp (°F)

175

Micron Rating (Nominal)

50 µm

O-Rings

EPDM

Recommended Flow Rate

150 GPM

Cap Material

Polypropylene

Cartridge Style

Drop-in

Change Frequency

As Needed

Contaminants Reduced

Sediment/Dirt/Rust

Diameter

4-1/2"

End Cap Type

Single Open 222 O-Ring

Filter Construction

Pleated

Filter Type

Sediment Depth

Flow Rate

150 GPM

Media Type

Thermally Bonded Polypropylene

Micron Rating

50 µm

Product Length

26-1/4"



The Watts Big-Bubba Pleated Filter Cartridge melt blown polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances and when chemical resistance may be a requirement.

Features:
  • 50 Micron
  • Double O-Ring Seals
  • Jumbo Cartridge Filters

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

26-1/4" (66.7 cm)

Box Dimensions

7x6.75x31.625

Box Quantity

1

Weight (lbs)

7

Details

Capacity

As Needed

Initial Pressure Drop

30 PSI Differential

Max Temp (°F)

175

Micron Rating (Nominal)

50 µm

O-Rings

EPDM

Recommended Flow Rate

150 GPM

Cap Material

Polypropylene

Cartridge Style

Drop-in

Change Frequency

As Needed

Contaminants Reduced

Sediment/Dirt/Rust

Diameter

4-1/2"

End Cap Type

Single Open 222 O-Ring

Filter Construction

Pleated

Filter Type

Sediment Depth

Flow Rate

150 GPM

Media Type

Thermally Bonded Polypropylene

Micron Rating

50 µm

Product Length

26-1/4"

Reviews