Watts

Watts Big-Bubba Pleated Cartridge, 1 Micron

Part Number: BBC-150-P1

In Stock

out of stock

In Stock

$169.49


The Watts Big-Bubba Pleated Filter Cartridge melt blown polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances and  when chemical resistance may be a requirement.

Specifications:
  • 1 Micron
  • Double O-Ring Seals
  • Jumbo Cartridge Filters

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

26.25" (66.7 cm)

Details

Cap Material

Polypropylene

Capacity

As Needed

Case Quantity

1

End Cap Type

222 O-ring

Flow Rate

150 Gallons Per Minute

Initial Pressure Drop

30 PSI Differential

Media Type

Thermally Bonded Polypropylene

Micron Rating (Nominal)

1 Micron

O Rings

EPDM

Operating Temperature Range

175 Degrees Fahrenheit




The Watts Big-Bubba Pleated Filter Cartridge melt blown polypropylene cartridges are recommended when depth filtration is necessary for gelatinous substances and  when chemical resistance may be a requirement.

Specifications:
  • 1 Micron
  • Double O-Ring Seals
  • Jumbo Cartridge Filters

Disclaimer: Big Bubba® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

26.25" (66.7 cm)

Details

Cap Material

Polypropylene

Capacity

As Needed

Case Quantity

1

End Cap Type

222 O-ring

Flow Rate

150 Gallons Per Minute

Initial Pressure Drop

30 PSI Differential

Media Type

Thermally Bonded Polypropylene

Micron Rating (Nominal)

1 Micron

O Rings

EPDM

Operating Temperature Range

175 Degrees Fahrenheit


Reviews