This Optipure 160-50125 FXI-22P+ Triple 20" System is a triple-housing water treatment system with drop-in 20” cartridges that reduces sediment down to 0.5-microns and reduces chlorine, taste & odor at a flow rate of 6.0 gpm for 60,000-gallons. The system includes IsoNet®, OptiPure’s patented scale inhibiting technology, which delivers consistent protection against the precipitation and accumulation of scale and provides a protective barrier to help guard against corrosion.

Features:

IsoNet®, OptiPure’s patented scale-inhibiting technology, helps protect equipment against scale and corrosion for the rated capacity of the system.
Reduces maintenance frequency and cost, and extends equipment life.
Gradient-density sediment filtration protects against dirt, rust and other debris down to 0.5-microns.
Additional 5-microns pre-filter provides further protection on water supplies with excessive sediment.
High-capacity activated-carbon filtration makes water taste great and protects equipment against corrosive chlorine.
Sturdy, powder-coated mounting bracket and full-flow inlet shut-off valve simplify installation.
Built-in pressure gauge allows visual monitoring of when filters need to be changed.
Inlet shut-off and depressurization valves make filter replacement quick and simple.
Minimizes waste by only replacing drop-in cartridges and reusing filter sumps.
NSF Certified under Standard 42.

Specifications:

Connection: Inlet & Outlet 1/2” FNPT
Operating Pressure Range: 10 - 125 psi (0.7 - 8.6 bar)
Inlet Water Temperature Range: 35˚ - 100˚F (2˚ - 38˚C)
Service Flow Rate: 6.0 gpm (22.7 lpm)
Sediment Reduction: 0.5 microns (nominal)

Installation Tips:

Feed-water connection to system should be COLD only.
Do not exceed system specifications for temperature and pressure.
Allow 3” clearance below system for filter housing removal and cartridge replacement.
Detailed installation, operation and maintenance manual included with each system.
No activation procedure or flushing required for system to perform as specified.