The Neo-Pure GE MWF Compatible Refrigerator Water Filter is NSF-Certified and ready to work for you. This replacement filter not only leaves your drinking water tasting better, but also reduces harmful contaminants including, but not limited to, lead, mercury, dichlorobenzene and cysts. NSF International is a nonprofit health and safety organization that thoroughly tests and certifies products against claims, manufacturing standards, and material safety for the well-being of consumers.
Features:

• 100% Guaranteed Fit: Compatible with select GE side-by-side and bottom-freezer refrigerators
• Neo-Pure Filtration Products Innovative Technology: Specifically-designed carbon block filter media for reduction of lead, benzene, cysts and many other harmful contaminants
• Easy Installation: Tool-free, twist-in style cartridge
• Long Filter Life: 300 gallons or six months of use
• NP-MWF Compatibility: MWF, GWF, GWFA, HWF, 9991

Purity is Our Priority - Neo-Pure MWF Contaminant Reduction:

• 99.90% of Asbestos
• 94.40% of Atrazine
• 96.40% of Benzene
• 98.80% of Carbofuran
• 97.40% of Chlorine
• 99.99% of Cysts
• 99.30% of Lead at pH 6.5
• 98.30% of Lead at pH 8.5
• 91% of Mercury at pH 6.5
• 88.30% of Mercury at pH 8.5
• 99.80% of P-Dichlorobenzene
• 99% of Particulates (Class I)

How to Install & Replace Your NP-MWF Compatible Water Filter:
If your fridge is equipped with a water filter change light, you should replace the filter when the indicator light turns red. If your refrigerator doesn't have a change indicator light, change at least every six months.

1. Locate the current water filter inside your refrigerator. It is generally located inside at the right top corner of your refrigerator.
2. Remove the old filter cartridge by grabbing the filter housing and turning to the left about 1/2 turn.
3. Remove the new NP-MWF filter from the box and fill it with tap water from your faucet. Taking this step allows for better water flow through the filter right after its installation.
4. Place the top of the new cartridge inside the cartridge housing/holder from where you just removed the old filter.
5. Slowly turn the filter clockwise until it stops. The cartridge will move about 1/2 turn and will automatically raise itself into position. Do not over tighten as you could damage the filter or the filter housing.
6. Run water through the system from the water dispenser. Do this for about 2-3 minutes or about 1 ½ gallons of water. This step will flush out any carbon particles and remove any air caught in the lines that will prevent water from sputtering.
7. To reset the filter change light, if your refrigerator has one, press and hold reset water filter button for 5-7 seconds.