Filmtec

Filmtec SW30HRLE-400i Sea Water 7500 GPD RO Membrane Element

Part Number: SW30HRLE-400i

Alt. Part Number: 246512

In Stock

out of stock

In Stock

$962.99

The Dow FILMTEC SW30HR LE-400i Sea Water Membrane element offers a combination of High Rejection (HR) and Low Energy (LE) requirements to allow lower total costs with medium and high salinity feed water. These elements comes with the distinct iLEC Interlocking Endcaps that help reduce system operating costs and reduce the risk of o-ring leaks that cause poor water quality.

Features:
  • Up to 7500 Gallon Per Day production
  • Up to 1200 psig
  • Fits Standard 8" Housings or Pressure Vessels
  • Enables systems to be designed and operated to optimize operating cost through lower energy consumption or to optimize capital cost through higher productivity at lower operating fluxes.
  • High NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards.
  • Effective use in permeate staged seawater desalination systems without impairing the performance of the downstream stage.
  • High performance over the operating lifetime without the use of oxidative post-treatments. This is one reason DOW FILMTEC elements are more durable and may be cleaned more effectively over a wider pH range (1-13) than other RO elements.
  • Automated, precision fabrication with a greater number of shorter membrane leaves reducing the effect of overall fouling and maximizing element efficiency, helping to lower your cost of operation.



Compatible with:
Filmtec Membranes246512

Weight & Dimensions

Weight (lbs)

11.75

Approx Length (Inches)

40-1/2"

Details

Max Temp (°F)

113

Max Pressure (Psi)

1200

Capacity

5 Years

Cartridge Style

Drop-In

Diameter

7.9"

Flow Rate

7,500 GPD

Inner/Outer Wraps

Fiberglass

Material Of Construction

Polyamide Thin-Film

Active Area

400 sq. ft.

Average Nacl Rejection

0.99

Chlorine Tolerance

<0.1 ppm

Cleaning Ph Range

1-13

Contaminants Reduced

Boron

Direction

Outside - In

Inlet Pressure

800 PSI

Max Feed Silt Density Index

5 Silt Density Index

Max Pressure Drop

15 PSI Differential

Membrane Type

Spiral Wound

Permeate Tube Diameter

1-1/8"

Ph Range

2-11


Filmtec




The Dow FILMTEC SW30HR LE-400i Sea Water Membrane element offers a combination of High Rejection (HR) and Low Energy (LE) requirements to allow lower total costs with medium and high salinity feed water. These elements comes with the distinct iLEC Interlocking Endcaps that help reduce system operating costs and reduce the risk of o-ring leaks that cause poor water quality.

Features:
  • Up to 7500 Gallon Per Day production
  • Up to 1200 psig
  • Fits Standard 8" Housings or Pressure Vessels
  • Enables systems to be designed and operated to optimize operating cost through lower energy consumption or to optimize capital cost through higher productivity at lower operating fluxes.
  • High NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards.
  • Effective use in permeate staged seawater desalination systems without impairing the performance of the downstream stage.
  • High performance over the operating lifetime without the use of oxidative post-treatments. This is one reason DOW FILMTEC elements are more durable and may be cleaned more effectively over a wider pH range (1-13) than other RO elements.
  • Automated, precision fabrication with a greater number of shorter membrane leaves reducing the effect of overall fouling and maximizing element efficiency, helping to lower your cost of operation.



Compatible with:
Filmtec Membranes246512

Weight & Dimensions

Weight (lbs)

11.75

Approx Length (Inches)

40-1/2"

Details

Max Temp (°F)

113

Max Pressure (Psi)

1200

Capacity

5 Years

Cartridge Style

Drop-In

Diameter

7.9"

Flow Rate

7,500 GPD

Inner/Outer Wraps

Fiberglass

Material Of Construction

Polyamide Thin-Film

Active Area

400 sq. ft.

Average Nacl Rejection

0.99

Chlorine Tolerance

<0.1 ppm

Cleaning Ph Range

1-13

Contaminants Reduced

Boron

Direction

Outside - In

Inlet Pressure

800 PSI

Max Feed Silt Density Index

5 Silt Density Index

Max Pressure Drop

15 PSI Differential

Membrane Type

Spiral Wound

Permeate Tube Diameter

1-1/8"

Ph Range

2-11

Documentation
Filmtec

Reviews