Watts

2.5" x 9.75" FlowMax HP with DOE End Cap - 0.2 Micron

Part Number: FPP-0.2-975-DOE

In Stock

out of stock

In Stock

$49.50


The Flow-Max HP Series Filter cartridges are cost effective, disposable, filter elements for a wide range of applications. Flow-Max HP cartridges are constructed of highly efficient pleated polypropylene filter media with extended filter area to provide high flow rates, low pressure drop and increased dirt holding capacity.

Applications:
High purity water, Chemicals, Traps for DI resin, Cosmetics, Electronics, Inks, Pre filtration for RO, Food & beverage, Magnetic tape coatings, Bottled water, Aqueous solutions, Edible oils, Plating solutions, Waste water.

 Features:
  • 100% polypropylene
  • Ratings from 0.2 to 50 micron
  • FDA listed polypropylene components
  • Removal efficiencies to 99.98%
  • High surface area
  • Long service life & reduced maintenance costs
  • Fixed pore construction for reliability
  • Change Out at 35 PSI Differential

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

9-3/4" (24.8 cm)

Details

Cap Material

Polypropylene

Capacity

6-12 Months

Cartridge Style

Drop-In

Case Quantity

24

End Cap Type

DOE

Filter Application

Sediment/Dirt/Rust

Gaskets

EPDM

Initial Pressure Drop

Approx. 4 psi @ 10 gpm PSI Differential

Media Type

Polypropylene

Micron Rating (Nominal)

0.2 Micron

Operating Temperature Range

Max 175 Degrees Fahrenheit

Outer Diameter

2.5"

Inner Diameter

1 Inches

Warranty & Certifications

Certifications

FDA CFR-21


2.5"





The Flow-Max HP Series Filter cartridges are cost effective, disposable, filter elements for a wide range of applications. Flow-Max HP cartridges are constructed of highly efficient pleated polypropylene filter media with extended filter area to provide high flow rates, low pressure drop and increased dirt holding capacity.

Applications:
High purity water, Chemicals, Traps for DI resin, Cosmetics, Electronics, Inks, Pre filtration for RO, Food & beverage, Magnetic tape coatings, Bottled water, Aqueous solutions, Edible oils, Plating solutions, Waste water.

 Features:
  • 100% polypropylene
  • Ratings from 0.2 to 50 micron
  • FDA listed polypropylene components
  • Removal efficiencies to 99.98%
  • High surface area
  • Long service life & reduced maintenance costs
  • Fixed pore construction for reliability
  • Change Out at 35 PSI Differential

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

9-3/4" (24.8 cm)

Details

Cap Material

Polypropylene

Capacity

6-12 Months

Cartridge Style

Drop-In

Case Quantity

24

End Cap Type

DOE

Filter Application

Sediment/Dirt/Rust

Gaskets

EPDM

Initial Pressure Drop

Approx. 4 psi @ 10 gpm PSI Differential

Media Type

Polypropylene

Micron Rating (Nominal)

0.2 Micron

Operating Temperature Range

Max 175 Degrees Fahrenheit

Outer Diameter

2.5"

Inner Diameter

1 Inches

Warranty & Certifications

Certifications

FDA CFR-21

Documentation
2.5"

Reviews