Pentek 155634-43 EPM-10 Carbon Block 10 micron Filter

Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

Features:

Highest carbon block dirt holding capacity for maximum cartridge life
Bad taste & odor and chlorine taste & odor reduction
Economically priced
Made entirely from FDA-compliant materials
For a wide range of residential, food service, commercial and industrial applications

These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

Compatible with:

American Plumber	WEPM, 155634-51
Keystone	902

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Capacity	3,000 Gallons
Cto Reduction Capacity	3000 Gallons
Gaskets	Buna-N
Initial Pressure Drop	1.5 PSI Differential
Inner/Outer Wraps	Polyolefin
Max Temp (°F)	180 °F
Micron Rating (Nominal)	10 µm
Min Temp (°F)	40 °F
Netting	Polyethylene
Cap Material	Polypropylene
Cartridge Style	Drop-in
Change Frequency	6-12 Months
Contaminants Reduced	Sediment/Dirt/Rust Chlorine/Taste/Odor
Diameter	2-7/8"
End Cap Type	Double Open Ended (DOE)
Filter Type	Carbon Block
Flow Rate	1 GPM
Media Type	Bonded Powdered Activated Carbon (PAC)
Micron Rating	10 µm
Origin	Assembled in the USA
Warranty & Certifications
Certifications	NSF/ANSI 42
Shipping Dimensions
Shipping Length	10 in.
Shipping Width	7 in.
Shipping Height	4 in.
Product Weight & Dimensions
Product Height	2.875
Product Length	9.875
Product Width	2.875
Product Weight (lbs)	2

Product Details
Capacity	3,000 Gallons
Cto Reduction Capacity	3000 Gallons
Gaskets	Buna-N
Initial Pressure Drop	1.5 PSI Differential
Inner/Outer Wraps	Polyolefin
Max Temp (°F)	180 °F
Micron Rating (Nominal)	10 µm
Min Temp (°F)	40 °F
Netting	Polyethylene
Cap Material	Polypropylene
Cartridge Style	Drop-in
Change Frequency	6-12 Months
Contaminants Reduced	Sediment/Dirt/Rust Chlorine/Taste/Odor
Diameter	2-7/8"
End Cap Type	Double Open Ended (DOE)
Filter Type	Carbon Block
Flow Rate	1 GPM
Media Type	Bonded Powdered Activated Carbon (PAC)
Micron Rating	10 µm
Origin	Assembled in the USA
Warranty & Certifications
Certifications	NSF/ANSI 42
Shipping Dimensions
Shipping Length	13 in.
Shipping Width	10.25 in.
Shipping Height	11.5 in.
Product Weight & Dimensions
Product Height	11.5
Product Length	13
Product Width	10.25
Product Weight (lbs)	14.516