PA-E

PAE TP-12P Reverse Osmosis Plasteel Storage Tank 3.2 Gal

Part Number: ROT-3.2-P

Alt. Part Number: TKE-2400-P, ROPT201-PLW, 52-35138, ROPRO4-W, 140S723

In Stock

out of stock

In Stock

$39.99 Regular price $53.49 (25% Off)

The PAE TankPAC TP-12P is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post-cured to ensure that your water is tasteless, odorless and contaminant free.

Added Protection. The Plasteel ROT-3.2-P is a stainless steel tank with a plastic shell covering. The plastic shell acts as a protective covering against damage so as to extend the life of your RO tank for years of clean, contaminant-free water.
Maintenance Free. The ROT-3.2-P tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber, meaning no more checking the air precharge. 
NSF Certified. This product is certified to NSF/ANSI Standard 58 for the reduction of contaminants using reverse osmosis technology.

Additional Specifications:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • CE approved
  • BPA free
Reverse Osmosis Tank Maintenance and Accessories:
  • A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve. 
  • For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance. 
  • The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer. 

Compatible with: Hague® | 200100, Marlo | C2000, A2225024


Weight & Dimensions

Approx Weight

8 Lbs

Height W/O Stand

14.3 Inches

Details

Capacity

2 Gallons @ 40 psi

Diameter

9.4 Inches

Diaphragm Materials

Buytl Rubber

Inlet/Outlet Size

1/4" MPT

Max Operating Pressure

100 PSI

Max Operating Temperature

104 Degrees Fahrenheit

Air Valve Stem Location

Bottom

Inlet/Outlet Location

Top

Tank Pre Charge

7 PSI

Volume

3.2 Gallons

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Warranty

1 year


PAE




The PAE TankPAC TP-12P is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post-cured to ensure that your water is tasteless, odorless and contaminant free.

Added Protection. The Plasteel ROT-3.2-P is a stainless steel tank with a plastic shell covering. The plastic shell acts as a protective covering against damage so as to extend the life of your RO tank for years of clean, contaminant-free water.
Maintenance Free. The ROT-3.2-P tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber, meaning no more checking the air precharge. 
NSF Certified. This product is certified to NSF/ANSI Standard 58 for the reduction of contaminants using reverse osmosis technology.

Additional Specifications:
  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • CE approved
  • BPA free
Reverse Osmosis Tank Maintenance and Accessories:
  • A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve. 
  • For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance. 
  • The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer. 

Compatible with: Hague® | 200100, Marlo | C2000, A2225024

Weight & Dimensions

Approx Weight

8 Lbs

Height W/O Stand

14.3 Inches

Details

Capacity

2 Gallons @ 40 psi

Diameter

9.4 Inches

Diaphragm Materials

Buytl Rubber

Inlet/Outlet Size

1/4" MPT

Max Operating Pressure

100 PSI

Max Operating Temperature

104 Degrees Fahrenheit

Air Valve Stem Location

Bottom

Inlet/Outlet Location

Top

Tank Pre Charge

7 PSI

Volume

3.2 Gallons

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Warranty

1 year

Documentation
PAE

Reviews