PA-E

PAE RO-132 Reverse Osmosis Storage Tank Powder Coated Steel 4.5 Gal

Part Number: ROT-4.5

Alt. Part Number: RO-132, TK-PRO-4-SS, 15112006, 55984-05, ROT-4W, 141S351

In Stock

out of stock

In Stock

$34.65

Intended Use:

The PAE TankPAC RO-132 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free.

Added Protection. The ROT-4.5 tank is a stainless steel tank with a two part epoxy primer, polyurethane paint finish. This added layer acts as a protective covering against damage so as to extend the life of your RO tank for years of clean, contaminant-free water.

Maintenance Free. The ROT-4.5 tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber, meaning no more checking the air precharge.
NSF Certified. This product is certified to NSF/ANSI Standard 58 for the reduction of contaminants using reverse osmosis technology.

Additional Specifications:

  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Plastic tank stand included
  • CE approved
  • BPA free
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Compatible with: AquaSky | ROT-4, Culligan Water Filters | 01004776, GE Water | WS32X10021, Microline Replacement Filters | C2000, Reverse Osmosis Storage Tanks | Amtrol 141S351, RO-4, 140S351, 92294, TK-AM005W, Reverse Osmosis Storage Tanks | Amtrol RO-4 (141S351), Well Tank Accessories | PAE RO-132,TK-PRO-4-SS, 15112006, 55984-05, ROT-4W


Weight & Dimensions

Approx Weight

9 Lbs

Height W/O Stand

13-3/4 Inches

Details

Capacity

2.8 Gallons @ 40 psi

Diameter

11 Inches

Diaphragm Materials

Butyl Rubber

Inlet/Outlet Size

1/4" MPT

Material Of Construction

Steel

Max Operating Pressure

100 PSI

Origin

Taiwan

Air Valve Stem Location

Side

Inlet/Outlet Location

Top

Tank Pre Charge

5 PSI

Volume

4.5 Gallons

Warranty & Certifications

Certifications

NSF Certified to Standard 58


PAE




Intended Use:

The PAE TankPAC RO-132 is built with FDA approved materials. The water storage chamber features a virgin polypropylene liner, high-grade chlorobutyl diaphragm and stainless steel 1/4" MPT water connection. The diaphragm is post cured to ensure that your water is tasteless, odorless and contaminant free.

Added Protection. The ROT-4.5 tank is a stainless steel tank with a two part epoxy primer, polyurethane paint finish. This added layer acts as a protective covering against damage so as to extend the life of your RO tank for years of clean, contaminant-free water.

Maintenance Free. The ROT-4.5 tank is built with a sealed brass air valve and o-ring sealed cap to ensure a leak-free air chamber, meaning no more checking the air precharge.
NSF Certified. This product is certified to NSF/ANSI Standard 58 for the reduction of contaminants using reverse osmosis technology.

Additional Specifications:

  • Stainless steel water connection
  • High-grade chlorobutyl diaphragm
  • Virgin polypropylene liner
  • Plastic tank stand included
  • CE approved
  • BPA free
Reverse Osmosis Tank Maintenance and Accessories:
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance. If your RO system uses 1/4" OD tubing to connect to the tank, select the LFPP4VFE4 valve. If your system uses 3/8" OD tubing select the PP6VFE4-MG valve.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank. Most automotive tire pressure gauges either do not read below 10 psi, or are not very accurate at pressures this low. 54846 Tank Pressure Gauge reads pressures between 0 and 20 psi, making it perfect for RO tank maintenance.
The RO tank should be sanitized before initial use and during every filter change. The Reverse Osmosis Sanitizing Maintenance Kit features Sani-System, an EPA & NSF certified sanitizer, making it a great alternative to using chlorine bleach. The kit also includes a syringe for application of the sanitizer.

Compatible with: AquaSky | ROT-4, Culligan Water Filters | 01004776, GE Water | WS32X10021, Microline Replacement Filters | C2000, Reverse Osmosis Storage Tanks | Amtrol 141S351, RO-4, 140S351, 92294, TK-AM005W, Reverse Osmosis Storage Tanks | Amtrol RO-4 (141S351), Well Tank Accessories | PAE RO-132,TK-PRO-4-SS, 15112006, 55984-05, ROT-4W

Weight & Dimensions

Approx Weight

9 Lbs

Height W/O Stand

13-3/4 Inches

Details

Capacity

2.8 Gallons @ 40 psi

Diameter

11 Inches

Diaphragm Materials

Butyl Rubber

Inlet/Outlet Size

1/4" MPT

Material Of Construction

Steel

Max Operating Pressure

100 PSI

Origin

Taiwan

Air Valve Stem Location

Side

Inlet/Outlet Location

Top

Tank Pre Charge

5 PSI

Volume

4.5 Gallons

Warranty & Certifications

Certifications

NSF Certified to Standard 58

Documentation
PAE

Reviews