HM Digital

HM Digital PS-200 Dual TDS Controller

Part Number: PS-200

In Stock

out of stock

In Stock

$174.12


The HM Digital PS-200 Dual TDS Controller constantly monitors the TDS levels of water produced by high-output commercial systems. With the PS-200 you can gauge the performance of your system and with the alarm you will immediately know if the TDS levels rise above an acceptable level.

Features:
  • Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems
  • Large, bright L.E.D. display
  • An alarm will sound if the TDS level rises above the user-set level for the output water
  • Installs easily in minutes
  • Includes two sensor probes
  • The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line)

Compatible with: AXEON/RO Ultratec | 200882


Weight & Dimensions

Approx Height (Inches)

2.8 Inches

Approx Weight

1 lb 8 oz; 1 lb .8 oz

Approx Width (Inches)

2.8 Inches

Approx Depth

4

Details

Alarm

Optional steady beep for Out line/Line 2 (set by user)

Calibration

Adjustable

Conversion Factor

NaCl

Measurement Range

0-999 Parts per Million

Features

Auto Temp Control (1 - 65°C); Bright 5/8" L.E.D. display

Accuracy

+/- 2 Percent

Power Source

AC 110V / AC 220V

Probe

1/2" bushing, 3 meter (9.8 ft) shielded cable

Relay Control

The unit will open or close a circuit via dry contacts when the TDS level (out line/line 2)reaches or exceeds the control setting. It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function)

Relay Voltage

5V (simple switch)

Resolution

1 Parts per Million

Setting

Controlled by on-screen up/down buttons

Warranty & Certifications

Warranty

1 year


HM

HM





The HM Digital PS-200 Dual TDS Controller constantly monitors the TDS levels of water produced by high-output commercial systems. With the PS-200 you can gauge the performance of your system and with the alarm you will immediately know if the TDS levels rise above an acceptable level.

Features:
  • Monitors and controls TDS levels of two water lines (e.g., feed water and product water) for high output commercial systems
  • Large, bright L.E.D. display
  • An alarm will sound if the TDS level rises above the user-set level for the output water
  • Installs easily in minutes
  • Includes two sensor probes
  • The PS-200 is a monitor for Line 1 (in-line) and a controller for Line 2 (out-line)

Compatible with: AXEON/RO Ultratec | 200882

Weight & Dimensions

Approx Height (Inches)

2.8 Inches

Approx Weight

1 lb 8 oz; 1 lb .8 oz

Approx Width (Inches)

2.8 Inches

Approx Depth

4

Details

Alarm

Optional steady beep for Out line/Line 2 (set by user)

Calibration

Adjustable

Conversion Factor

NaCl

Measurement Range

0-999 Parts per Million

Features

Auto Temp Control (1 - 65°C); Bright 5/8" L.E.D. display

Accuracy

+/- 2 Percent

Power Source

AC 110V / AC 220V

Probe

1/2" bushing, 3 meter (9.8 ft) shielded cable

Relay Control

The unit will open or close a circuit via dry contacts when the TDS level (out line/line 2)reaches or exceeds the control setting. It can be used to control a pump, solenoid valve or other device. (In line/Line 1 does not have a control function)

Relay Voltage

5V (simple switch)

Resolution

1 Parts per Million

Setting

Controlled by on-screen up/down buttons

Warranty & Certifications

Warranty

1 year

Documentation
HM
HM

Reviews