29-1/4

The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through Veolia's patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal.

Features:

Lower density at the surface of the filter with progressively higher density towards the center
Contains no wetting agents, solvents, antistatic agents or binders
Meets the requirement of the FDA for food and beverage contact
Long filter life
Superior dirt holding capacity
Potable water filtration
Chemical filtration - wide chemical compatibility
Plating baths
Amine Filtration

Note: The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps.

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Micron Rating (Nominal)	10 µm
Psid@Flow Rate	0.1 psid @ 3 GPM (Data based on 10" length filter)
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	Double Open Ended (DOE) - No Cap
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Inner Diameter	1"
Media Type	Polypropylene
Micron Rating	10 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42
Product Weight & Dimensions
Product Length	30 1/4"
Product Weight (lbs)	1.85

Product Details
Micron Rating (Nominal)	10 µm
Psid@Flow Rate	0.1 psid @ 3 GPM (Data based on 10" length filter)
Cap Material	Polypropylene
Cartridge Style	Drop-in
Contaminants Reduced	Sediment/Dirt/Rust
Diameter	2-1/2"
End Cap Type	Double Open Ended (DOE) - No Cap
Filter Construction	Melt Blown
Filter Type	Sediment Depth
Inner Diameter	1"
Media Type	Polypropylene
Micron Rating	10 µm
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42
Product Weight & Dimensions
Product Length	30 1/4"
Product Weight (lbs)	37

29-1/4" Purtrex Sediment Depth Filter - 10 Mic (PX10-29 1/4)

29-1/4" Purtrex Sediment Depth Filter - 10 Mic (PX10-29 1/4)