Watts

2-1/2" x 9-7/8" Watts Flow-Pro Grooved Melt Blown Sediment Filter - 20 mic

Part Number: FPMBG-20-975

In Stock

out of stock

In Stock

$2.99


The Watts FPMBG-20-978 Flow-Pro Grooved Melt Blown Sediment Filters have a greater surface area to provide increased throughput and reduced costs. The same specifications and pressure drop rates apply as the standard melt blown sediment filters. The grooved cartridges are also NSF Certified to Standard 42.

Applications:
  • Potable Water
  • Beverages
  • Pre-filtration for reverse osmosis equipment
  • Fine chemicals
  • Electronics
  • Plating solutions and more!

Features:
  • Low Cost
  • Excellent chemical resistance
  • Food Grade ingredients
  • No leachables
  • High dirt holding capacity
  • Grooved for greater surface area

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

9-7/8" (25.1 cm)

Details

Capacity

6-12 Months

Cartridge Style

Drop-In

Case Quantity

48

Filter Application

Sediment/Dirt/Rust, Particulates

Flow Rate

2 Gallons Per Minute

Media Type

Polypropylene

Micron Rating (Nominal)

20 Micron

Operating Temperature Range

35- 140 Degrees Fahrenheit

Outer Diameter

2.5"

Warranty & Certifications

Certifications

NSF 42


2-1/2"





The Watts FPMBG-20-978 Flow-Pro Grooved Melt Blown Sediment Filters have a greater surface area to provide increased throughput and reduced costs. The same specifications and pressure drop rates apply as the standard melt blown sediment filters. The grooved cartridges are also NSF Certified to Standard 42.

Applications:
  • Potable Water
  • Beverages
  • Pre-filtration for reverse osmosis equipment
  • Fine chemicals
  • Electronics
  • Plating solutions and more!

Features:
  • Low Cost
  • Excellent chemical resistance
  • Food Grade ingredients
  • No leachables
  • High dirt holding capacity
  • Grooved for greater surface area

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

9-7/8" (25.1 cm)

Details

Capacity

6-12 Months

Cartridge Style

Drop-In

Case Quantity

48

Filter Application

Sediment/Dirt/Rust, Particulates

Flow Rate

2 Gallons Per Minute

Media Type

Polypropylene

Micron Rating (Nominal)

20 Micron

Operating Temperature Range

35- 140 Degrees Fahrenheit

Outer Diameter

2.5"

Warranty & Certifications

Certifications

NSF 42

Documentation
2-1/2"

Reviews