Watts

2-1/2" x 9-7/8" Polypropylene Sediment Depth Grooved Filter - 5 mic

Part Number: FPMBG-5-975

In Stock

out of stock

In Stock

This item is discontinued. We recommend the Neo-Pure MBG-25098-05 9-7/8" Grooved Polypropylene Sediment Filter 5 Mic as a substitute.


The Polypropylene Grooved Melt Blown Sediment Filters have a greater surface area to provide increased throughput and reduced costs. The same specifications and pressure drop rates apply as the standard melt blown sediment filters. The grooved cartridges are also NSF Certified to Standard 42.

Features:
  • Low Cost
  • Excellent chemical resistance
  • Food Grade ingredients
  • No leachables
  • High dirt holding capacity
  • Grooved for greater surface area
Applications:
  • Potable Water
  • Beverages
  • Pre-filtration for reverse osmosis equipment
  • Fine chemicals
  • Electronics
  • Plating solutions and more!

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.



Weight & Dimensions

Approx Length (Inches)

9-7/8"

Case Quantity

48

Weight (lbs)

0.6

Details

Capacity

6-12 Months

Filter Application

Sediment/Dirt/Rust

Max Temp (°F)

140

Micron Rating (Nominal)

5 µm

Min Temp (°F)

35

Recommended Flow Rate

2 GPM

Cap Material

Polypropylene

Cartridge Style

Drop-in

Change Frequency

6-12 Months

Diameter

2-1/2"

End Cap Type

Double Open Ended (DOE) - No Cap

Filter Construction

Melt Blown - Grooved

Filter Type

Sediment Depth

Flow Rate

2 GPM

Media Type

Polypropylene

Micron Rating

5 µm

Product Length

9-7/8"

Warranty & Certifications

Certifications

NSF/ANSI 42




The Polypropylene Grooved Melt Blown Sediment Filters have a greater surface area to provide increased throughput and reduced costs. The same specifications and pressure drop rates apply as the standard melt blown sediment filters. The grooved cartridges are also NSF Certified to Standard 42.

Features:
  • Low Cost
  • Excellent chemical resistance
  • Food Grade ingredients
  • No leachables
  • High dirt holding capacity
  • Grooved for greater surface area
Applications:
  • Potable Water
  • Beverages
  • Pre-filtration for reverse osmosis equipment
  • Fine chemicals
  • Electronics
  • Plating solutions and more!

Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.


NOTE: This item is discontinued. We recommend the Neo-Pure MBG-25098-05 9-7/8" Grooved Polypropylene Sediment Filter 5 Mic as a substitute.

Weight & Dimensions

Approx Length (Inches)

9-7/8"

Case Quantity

48

Weight (lbs)

0.6

Details

Capacity

6-12 Months

Filter Application

Sediment/Dirt/Rust

Max Temp (°F)

140

Micron Rating (Nominal)

5 µm

Min Temp (°F)

35

Recommended Flow Rate

2 GPM

Cap Material

Polypropylene

Cartridge Style

Drop-in

Change Frequency

6-12 Months

Diameter

2-1/2"

End Cap Type

Double Open Ended (DOE) - No Cap

Filter Construction

Melt Blown - Grooved

Filter Type

Sediment Depth

Flow Rate

2 GPM

Media Type

Polypropylene

Micron Rating

5 µm

Product Length

9-7/8"

Warranty & Certifications

Certifications

NSF/ANSI 42

Reviews