Watts AquaLock/SeaTech

Watts AquaLock/SeaTech - Reducing Branch Tee - 3/4 CTS x 3/4 CTS x 1/2 CTS Branch

Part Number: 3524R-1410

Alt. Part Number: 003524R-1410, 013524R-1410

In Stock

out of stock

In Stock

Watts has rebranded SeaTech to Watts AquaLock

$7.85

Note: Watts has rebranded SeaTech to Watts AquaLock. This rebrand does not affect the part numbers. However, during the transition the product and packaging that you order may be branded as SeaTech or Watts AquaLock. The color will also vary. The size and specs of the products as well as the part numbers will remain the same.
Features:
  • Fits in most 10" housings
  • Fits Culligan HF-150, HF-160, and HF-360 Housings
  • Reduces chlorine taste and odor, and MTBE*
  • Greater VOC reduction than standard GAC cartridges*
  • Post-filter to reduce carbon fines
  • The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channeling or bypass
  • Before the water exits the cartridge, a 20-micron postfilter helps remove carbon fines and other suspended particles from the filtered water
*Notes Based on Manufacturer's Internal Testing:
  • Internal testing of CC-10(s) at 0.6 gpm (2.3 L/min) has shown an average of 92% reduction of 18.9 ppb MTBE through 750 gallons (2840 L), and an average of 98% reduction of 300 ppb chloroform (VOC surrogate chemical) through 425 gallons (1605 L)
  • Cartridge performance and capacity may vary depending on water conditions and testing variables
  • For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system
  • A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, follow the instructions for flushing the cartridge to remove fines.
  • It is recommended that you run the tap for 20 seconds prior to using the water for drinking or cooking purposes




Details

Application

Water

Body Material

Polysulfone

Max Pressure (Psi)

250

Max Temp (°F)

180

Min Pressure (Psi)

0

Min Temp (°F)

33

Mounting Options

Free Floating

Push-In Size

7/8" OD, 5/8" OD

Seal Material

EPDM

Series

35 Series

Color / Finish

White

Sub-Type

Reducer Tee

Type

Tee

Warranty & Certifications

Certifications

NSF 61; NSF 14; FDA Approved; IAPMO ASSE 1061-2006


Watts

Watts

Watts




Note: Watts has rebranded SeaTech to Watts AquaLock. This rebrand does not affect the part numbers. However, during the transition the product and packaging that you order may be branded as SeaTech or Watts AquaLock. The color will also vary. The size and specs of the products as well as the part numbers will remain the same.
Features:
  • Fits in most 10" housings
  • Fits Culligan HF-150, HF-160, and HF-360 Housings
  • Reduces chlorine taste and odor, and MTBE*
  • Greater VOC reduction than standard GAC cartridges*
  • Post-filter to reduce carbon fines
  • The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channeling or bypass
  • Before the water exits the cartridge, a 20-micron postfilter helps remove carbon fines and other suspended particles from the filtered water
*Notes Based on Manufacturer's Internal Testing:
  • Internal testing of CC-10(s) at 0.6 gpm (2.3 L/min) has shown an average of 92% reduction of 18.9 ppb MTBE through 750 gallons (2840 L), and an average of 98% reduction of 300 ppb chloroform (VOC surrogate chemical) through 425 gallons (1605 L)
  • Cartridge performance and capacity may vary depending on water conditions and testing variables
  • For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system
  • A drinking water cartridge may contain carbon fines (very fine black powder). After installation and before using the water, follow the instructions for flushing the cartridge to remove fines.
  • It is recommended that you run the tap for 20 seconds prior to using the water for drinking or cooking purposes



NOTE: Watts has rebranded SeaTech to Watts AquaLock

Details

Application

Water

Body Material

Polysulfone

Max Pressure (Psi)

250

Max Temp (°F)

180

Min Pressure (Psi)

0

Min Temp (°F)

33

Mounting Options

Free Floating

Push-In Size

7/8" OD, 5/8" OD

Seal Material

EPDM

Series

35 Series

Color / Finish

White

Sub-Type

Reducer Tee

Type

Tee

Warranty & Certifications

Certifications

NSF 61; NSF 14; FDA Approved; IAPMO ASSE 1061-2006

Documentation
Watts
Watts
Watts
Reviews