Home / Water Filtration Systems / Drinking Water Filtration Systems / Viqua Copper Series VT1-DWS UV Drinking Water System Powered By Sterilight 1 gpm
Viqua / Trojan

Viqua Copper Series VT1-DWS UV Drinking Water System Powered By Sterilight 1 gpm

Part Number: VT1-DWS
Product image 1
Your price:
Choose
120 Volt
230 Volt
The Viqua Copper Series VT1-DWS Ultraviolet Drinking Water System provides a point-of-use water treatment system with both disinfection and filtration. The VT1-DWS is ideal for point of use applications such as under the sink, in a basement or other locations, depending on available space.

Specifications:
  • Inlet Connection: 1/4" quick connect
  • Outlet Connection: 3/8" quick connect
  • This compact unit incorporates Viqua Copper disinfection system and two filter housings, all on the same installation bracket
  • The Viqua VT1 provides point-of-use disinfection with a flow rate of 1 gpm at a 30 mJ/cm² dose (0.7 gpm if a dose of 40 mJ/cm² is required.)
Features:
  • This modular system, incorporating the new Copper controller, is ideal for any application requiring a high flow rate in a compact space
  • The VT-1 is manufactured with a polished, 304 stainless steel axial flow reactor
  • Lamp change is easily accomplished without interrupting the water flow, or having to drain the reactor and the  connector can be removed without any additional tools
This system is compatible with the S212RL Sterilight Lamp and the QS-212 Quartz Sleeve. For any necessary system replacements, the UV Lamp/Quartz Sleeve Combo Kit for VT1-DWS includes:
  • Sterilight Lamp (1): S212RL
  • Sterilight Quartz Sleeve (1): QS-212
  • Sterilight O-Rings (2): 410867
NOTE: 230V systems are shipped with 2-prong continental European (CEE-7/7) 2 pin with ground "Schuko" power cord.

California residents Prop 65 Warning
WARNING!
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov