Intended Use:
The Trojan 602807 Lamp is an original replacement UV bulb for use with Trojan Pro15, F, F Plus, F4, F4 Plus, and UVMax-47 water disinfection systems. When you buy a Genuine Trojan 602807 UV lamp you can be assured of the performance, safety, and warranty of your system.Features:
- The 602807 UV Lamp is compatible with the Pro15, UVMAX F and F Plus, F4-50 Plus, F4, F4 Plus, F4-V, and F4-V Plus systems
- 2 O-rings included with lamp
- Long-life coated for stability, longer life and increased efficiency with bulb life up to up to 9,000 hours
- Low pressure high output lamp with a black base
- Environmentally friendly, with less than 10mg of mercury; 70% less than most other commercially available UV lamps
Trojan UV Lamp 602807 Replacement Diagram:
Replacing your 602807 UV Lamp is easy, all Trojan UV lamps install with an easy quarter-turn to a positive stop to prevent over tightening.Note: If you are replacing discontinued lamp part # 602729 you will also need adapter part # 602980.
Details
Application | Germicidal (254nm), Preheat |
Capacity | 9,000 Hours |
Power | 102 Watts |
Pin Configuration | 4 Pin |
Intended Use:
The Trojan 602807 Lamp is an original replacement UV bulb for use with Trojan Pro15, F, F Plus, F4, F4 Plus, and UVMax-47 water disinfection systems. When you buy a Genuine Trojan 602807 UV lamp you can be assured of the performance, safety, and warranty of your system.Features:
- The 602807 UV Lamp is compatible with the Pro15, UVMAX F and F Plus, F4-50 Plus, F4, F4 Plus, F4-V, and F4-V Plus systems
- 2 O-rings included with lamp
- Long-life coated for stability, longer life and increased efficiency with bulb life up to up to 9,000 hours
- Low pressure high output lamp with a black base
- Environmentally friendly, with less than 10mg of mercury; 70% less than most other commercially available UV lamps
Trojan UV Lamp 602807 Replacement Diagram:
Replacing your 602807 UV Lamp is easy, all Trojan UV lamps install with an easy quarter-turn to a positive stop to prevent over tightening.Note: If you are replacing discontinued lamp part # 602729 you will also need adapter part # 602980.
Details
Application | Germicidal (254nm), Preheat |
Capacity | 9,000 Hours |
Power | 102 Watts |
Pin Configuration | 4 Pin |
Documentation