Home / Filters & Cartridges / Sediment Filters / Pentek #420 Polypro Felt Bag 50 Micron
Pentair Water

Pentek #420 Polypro Felt Bag 50 Micron

Part Number: 155392-03
Alt. Part Number: BP-420-50
Product image 1
Product image 2
Your price:
Choose
Single
Box of 20
Polypropylene bags are compatible with a broad range of corrosive fluids including organic solvents, oils, acids, alkalis and micro-organisms. BP Series (Polypropylene Felt) Bags. An assortment of filtration ratings is offered from 1 to 200 microns to comply with any filtration requirement. The bags are manufactured from felt because of its high solids loading capabilities, in comparison to similar mesh fabrics. The media is created by needle-punching two layers of synthetic fibers together in a supporting scrim. A glazed finish, created by melting the outermost surface fibers, is used to produce a bond that reduces the possibility of migration.

Specifications:
  • Dimensions: 4" x 18"
  • Filter Media: Glazed Polypropylene Felt
  • Micron: Available 1 to 200 micron
  • Max Temp: 200° F(93.3°C) (bags only)
  • Flow Rate: 40 gpm*
  • Sold As: 10 bag minimum purchase, 20 per case
NOTE:*Maximum flow rates for filter bags are guides only and are dependent on variables such as fluid viscosity, temperature, amount and type of contaminants, type and size of filter bag and micron rating. The maximum rates (gpm water @ 68 deg. F) are normally only achieved under ideal conditions.

California residents Prop 65 Warning
WARNING!
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov