Pentek 155783-43 EPM-20BB Carbon Block 10 micron Filter

The Pentek EPM Series cartridges have a high porosity design that helps prevent the cartridge from plugging before its adsorption capability is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

Features:

Highest carbon block dirt holding capacity for maximum cartridge life
Bad taste & odor and chlorine taste & odor reduction
Economically priced
Made entirely from FDA-compliant materials
For a wide range of residential, food service, commercial and industrial applications

NOTE: These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge.

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Capacity	30,000 Gallons
Cto Reduction Capacity	30000 Gallons
Gaskets	Buna-N
Initial Pressure Drop	4 PSI Differential
Inner/Outer Wraps	Polyolefin
Max Temp (°F)	180 °F
Micron Rating (Nominal)	10 µm
Min Temp (°F)	40 °F
Netting	Polyethylene
Cap Material	Polypropylene
Cartridge Style	Drop-in
Change Frequency	6-12 Months
Contaminants Reduced	Sediment/Dirt/Rust Chlorine/Taste/Odor
Diameter	4-5/8"
End Cap Type	Double Open Ended (DOE)
Filter Type	Carbon Block
Flow Rate	4 GPM
Media Type	Bonded Powdered Activated Carbon (PAC)
Micron Rating	10 µm
Origin	Assembled in the USA
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42
Shipping Dimensions
Shipping Length	26 in.
Shipping Width	6 in.
Shipping Height	6 in.
Product Weight & Dimensions
Product Height	4.5
Product Length	20
Product Width	4.5
Product Weight (lbs)	7

Product Details
Capacity	30,000 Gallons
Cto Reduction Capacity	30000 Gallons
Gaskets	Buna-N
Initial Pressure Drop	4 PSI Differential
Inner/Outer Wraps	Polyolefin
Max Temp (°F)	180 °F
Micron Rating (Nominal)	10 µm
Min Temp (°F)	40 °F
Netting	Polyethylene
Cap Material	Polypropylene
Cartridge Style	Drop-in
Change Frequency	6-12 Months
Contaminants Reduced	Sediment/Dirt/Rust Chlorine/Taste/Odor
Diameter	4-5/8"
End Cap Type	Double Open Ended (DOE)
Filter Type	Carbon Block
Flow Rate	4 GPM
Media Type	Bonded Powdered Activated Carbon (PAC)
Micron Rating	10 µm
Origin	Assembled in the USA
Warranty & Certifications
Product Certification Standard	NSF/ANSI 42
Shipping Dimensions
Shipping Length	22 in.
Shipping Width	10.5 in.
Shipping Height	10.25 in.
Product Weight & Dimensions
Product Height	10.25
Product Length	22
Product Width	10.5
Product Weight (lbs)	28

Pentek 155783-43 EPM-20BB Carbon Block 10 micron Filter Manual