Optipure 252-10810 PTS-10 PolyTrix Cartridge
Part Number: 252-00810
Alt. Part Number: 252-10810
in stock
only a few left!
out of stock
Expected ship date
Please note: This item is not available for same day shipping.
Use the chat feature or give us a call at 864-284-1801 for
further information.
Please note: This item is not available for same day shipping. Use
the chat feature or give us a call at 864-284-1801 for further
information.
More expected soon
Please note: This item is not available for same day shipping. Use
the chat feature or give us a call at 864-284-1801 for further
information.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.
Features:
- PolyTrix gradient-density depth filtration reduces dirt, rust, and other debris as small as 5-microns to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.
- Protects equipment from the damaging effects of scale and corrosion.
- 70 grams of scale inhibitor in IsoNet® provides consistent protection over the life of the cartridge.
- Generates less waste, only the drop-in cartridge is replaced. No discarding of metal or plastic quick change filters.
- Replacement cartridge cost per gallon is much less than proprietary quick-change filters.
- NSF Certified under Standard 42 for material requirements only.
Specifications:
- Operating Pressure Range: 10 - 125 psi (0.7 - 8.6 bar)
- Inlet Water Temperature Range: 35˚ - 100˚F (2˚ - 38˚C)
- Service Flow Rate: 2.5 gpm (9.5 lpm)
- Sediment Reduction: 5 microns (nominal)
- Scale & Corrosion Inhibitor: IsoNet (70 grams)
Installation Tips:
- Ensure cartridge is designed to replace the existing cartridge.
- Do not exceed cartridge specifications for temperature and pressure.
- Allow 3” clearance below system for filter cartridge removal and replacement.
- No activation procedure or flushing is required for cartridge to perform as specified.
- Feed-water connection to system should be COLD only
NOTE: Drop-in style cartridge used in OptiPure FXTS Systems and secondary treatment in combination systems. Can be used as a retrofit cartridge with most standard 10” drop-in style housings
Product Details | |
---|---|
Max Pressure (Psi) | 125 |
Min Pressure (Psi) | 10 |
Temperature Range | 35˚ - 100˚F (2˚ - 38˚C) |
Flow Rate | 2.5 gpm |
Micron Rating | 5 microns (nominal) |
Product Weight & Dimensions | |
Product Height | 2.8 |
Product Length | 9.8 |
Product Width | 2.8 |
Product Weight (lbs) | 1.5 |
Features:
- PolyTrix gradient-density depth filtration reduces dirt, rust, and other debris as small as 5-microns to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.
- Protects equipment from the damaging effects of scale and corrosion.
- 70 grams of scale inhibitor in IsoNet® provides consistent protection over the life of the cartridge.
- Generates less waste, only the drop-in cartridge is replaced. No discarding of metal or plastic quick change filters.
- Replacement cartridge cost per gallon is much less than proprietary quick-change filters.
- NSF Certified under Standard 42 for material requirements only.
Specifications:
- Operating Pressure Range: 10 - 125 psi (0.7 - 8.6 bar)
- Inlet Water Temperature Range: 35˚ - 100˚F (2˚ - 38˚C)
- Service Flow Rate: 2.5 gpm (9.5 lpm)
- Sediment Reduction: 5 microns (nominal)
- Scale & Corrosion Inhibitor: IsoNet (70 grams)
Installation Tips:
- Ensure cartridge is designed to replace the existing cartridge.
- Do not exceed cartridge specifications for temperature and pressure.
- Allow 3” clearance below system for filter cartridge removal and replacement.
- No activation procedure or flushing is required for cartridge to perform as specified.
- Feed-water connection to system should be COLD only
NOTE: Drop-in style cartridge used in OptiPure FXTS Systems and secondary treatment in combination systems. Can be used as a retrofit cartridge with most standard 10” drop-in style housings
Product Details | |
---|---|
Max Pressure (Psi) | 125 |
Min Pressure (Psi) | 10 |
Temperature Range | 35˚ - 100˚F (2˚ - 38˚C) |
Flow Rate | 2.5 gpm |
Micron Rating | 5 microns (nominal) |
Product Weight & Dimensions | |
Product Height | 2.8 |
Product Length | 9.8 |
Product Width | 2.8 |
Product Weight (lbs) | 1.5 |
- Its expected shipping date is:
- Use the chat feature or give us a call at 864-284-1801 for information about when it will be available for shipping.
- This does not qualify for free shipping.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.