Home / Filters & Cartridges / Replacement Water Filters & Cartridges / Optipure 252-10410 S5-20B Prefilter Cartridge
Everpure Commercial

Optipure 252-10410 S5-20B Prefilter Cartridge

Part Number: 252-10410
Your price:
This Optipure 252-10410 S5-20B Prefilter Cartridge is a 4.5” x 20” Drop-In, extra-high capacity PolyTrix dual-gradient density filter cartridge that reduces sediment down to 5.0-microns.

  • PolyTrix gradient-density depth filtration reduces dirt, rust, and other debris as small as 5-microns to assure clean, clear water and protect solenoids, valves and other fittings against wear and plugging.
  • Filters out larger dirt and sediment particles to extend the life of downstream filters or filtration systems.
  • Generates less waste, only the drop-in cartridge is replaced. No discarding of metal or plastic quick change filters.

  • Operating Pressure Range: 10 - 125 psi (0.7 - 8.6 bar)
  • Inlet Water Temperature Range: 35˚ - 100˚F (2˚ - 38˚C)
  • Sediment Reduction: 0.5 microns (nominal)

Installation Tips:
  • Ensure cartridge is designed to replace the existing cartridge.
  • Do not exceed cartridge specifications for temperature and pressure.
  • Allow 3” clearance below system for filter cartridge removal and replacement.
  • No activation procedure or flushing is required for cartridge to perform as specified.
  • Feed-water connection to system should be COLD only.

NOTE: Drop-in style sediment filter for OptiPure FX Systems. Can be used as a retrofit cartridge with most 4.5” x 20” drop-in style housings.

California residents Prop 65 Warning
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov