Omnipure

Omnipure Q5348 6" Calcite Filter for pH/TDS Balance

Part Number: Q5348

Alt. Part Number: 307020

In Stock

out of stock

In Stock

$14.98


The Omnipure Q5348 Calcite Filter is a 6" combination in-line filter consisting of a coconut shell GAC and calcite.  This filter can be used in many different applications for the purpose of correcting low pH levels. This post filter reduces sediment, bad taste, odor and chlorine.  The Omnipure Q5348 increases pH levels by re-mineralization.  The calcite is a mineral which dissolves in acidic water which will neutralize the pH.

Specifications;
  • Temperature Range: 40 - 100°F
  • Micron Rating: 20 microns
  • Max Pressure: 125 PSI
  • Flow Rate: 1 GPM @ 125 PSI
  • Life Span: 6 months (depends on water quality and frequency)
  • Filter Media: Coconut Shell Granular Activated Carbon Block with Calcite
  • Calcite adds mineral and TDS back into the water as well as stabilizing the pH level of the water.
  • Use Calcite only for pH levels 6.0 - 6.8. Use Calcite/Corosex for pH levels 5.5 - 6.0.


Details

Capacity

6 months

Filter Application

pH Correction

Flow Rate

1 GPM @ 125 PSI

Media Type

Granular Activated Carbon (GAC)

Micron Rating (Nominal)

20 Micron

Operating Pressure Range

Max 125 PSI


Omnipure





The Omnipure Q5348 Calcite Filter is a 6" combination in-line filter consisting of a coconut shell GAC and calcite.  This filter can be used in many different applications for the purpose of correcting low pH levels. This post filter reduces sediment, bad taste, odor and chlorine.  The Omnipure Q5348 increases pH levels by re-mineralization.  The calcite is a mineral which dissolves in acidic water which will neutralize the pH.

Specifications;
  • Temperature Range: 40 - 100°F
  • Micron Rating: 20 microns
  • Max Pressure: 125 PSI
  • Flow Rate: 1 GPM @ 125 PSI
  • Life Span: 6 months (depends on water quality and frequency)
  • Filter Media: Coconut Shell Granular Activated Carbon Block with Calcite
  • Calcite adds mineral and TDS back into the water as well as stabilizing the pH level of the water.
  • Use Calcite only for pH levels 6.0 - 6.8. Use Calcite/Corosex for pH levels 5.5 - 6.0.

Details

Capacity

6 months

Filter Application

pH Correction

Flow Rate

1 GPM @ 125 PSI

Media Type

Granular Activated Carbon (GAC)

Micron Rating (Nominal)

20 Micron

Operating Pressure Range

Max 125 PSI

Documentation
Omnipure

Reviews