Home /
Filters & Cartridges /
Accessories for Water Filters & Cartridges /
NeoFit - Acetal Gray Filter Strainer 3/8" x 3/8" Push-in 100 mesh (150 mic)
The NeoFit Strainers are used for the protection of your pumps, filters, and other more expensive equipment. These strainers prevent damage by keeping debris and other particles out of your pumps and filters, which eliminates unnecessary and costly repairs. They also allow you to easily reduce your filter consumption. The filter screen uses perforated mesh media to strain out these particles.
Features:
Fittings Comparison: Acetal Gray
Features:
- The detachable CAP and BODY allow for easy installation and maintenance
- Can be used with a variety of chemicals and gases. However, when using with other than water or air, please refer to the Chemical Compatability Tables or consult with your NeoFit representative.
- Compatible with standard-sized tubing from a variety of other manufacturers
- Stainless Steel Filter Strainer: 100 mesh (150 micron)
- Inlet/Outlet: 3/8" Push-in
- Strainer: 100 mesh (150 micron)
- Max. Operating Pressure: 145psi
- Max. Operating Temp: (-20F) - (+150F)
Fittings Comparison: Acetal Gray
Size |
NEO: Working PSI @ Temp |
JG: Working PSI @ Temp |
---|---|---|
1/4" |
290psi @ 68F/ 232psi @ 150F |
230psi @ 68F/ 150 psi at 150F |
3/8" |
232psi @ 68F/ 203psi @ 150F |
150psi @ 68F/ 100 psi at 150F |
1/2" |
203psi @ 68F/ 116psi @ 150F |
150psi @ 68F/ 100 psi at 150F |
Certifications |
NEO: NSF 51 & 61 Certified |
JG: NSF 51 & 61 Certified |
Size |
NEO: Max Torque |
JG: Max Torque |
---|---|---|
1/4" |
1ft/lb (1.5nm) |
1ft/lb (1.5nm) |
3/8" |
2ft/lb (3 nm) |
2ft/lb (3 nm) |
1/2" |
2ft/lb (3 nm) |
2ft/lb (3 nm) |
California residents Prop 65 Warning
WARNING!
This product contains materials known to the State of California to cause
cancer and birth defects or other reproductive harm.
www.p65warnings.ca.gov
true">
Request sent!
This message will close in 2 seconds...
Request a Quote
Call our sales team at (864) 284-1801
Or, fill out the following form and we will be in touch.