The John Guest service valve (chrome plated) is used to connect plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated to discourage tampering. To install, simply push the valve fully onto the pipe. To disconnect, push the collet towards the body of the push-fit fitting and pull the pipe release. The service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools.

Features and benefits:

• DZR brass body with a chrome plate is ideal for surface mounted pipework
• Instant push-fit service valve with 1/4 turn iso
• Connect/disconnect in seconds without tools
• Safe flame-free installation, with no hot works, glue or flux
• Grip & Seal collet with stainless steel teeth and main O-Ring seal
• Compatible with PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Suitable for cold and hot water use only

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov