Industrial Test Systems

ITS 481303 Arsenic Quick II, 50 Tests

Part Number: 481303

In Stock

out of stock

In Stock

$179.81


Arsenic Quick II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick II gives results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test. With only 3 simple test procedures, Arsenic Quick II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

Features:
  • Results in only 14 minutes
  • Reagents are clearly labeled and color-coded
  • A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement
  • All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing
  • All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit
Here's How It Works:
First, your water sample is mixed in the supplied reaction vessel with reagent #1 (tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, the addition of zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample. 
As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.


Details

Measurement Range

1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb

Sensitivity

< 1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb (µg/L)

Box Quantity

50

Accuracy

+/- 1.2 ppb or +/- 16% Percent

Result / Cycle Time

14 Minutes

Test Type

Arsenic




Arsenic Quick II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick II gives results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test. With only 3 simple test procedures, Arsenic Quick II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

Features:
  • Results in only 14 minutes
  • Reagents are clearly labeled and color-coded
  • A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement
  • All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing
  • All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit
Here's How It Works:
First, your water sample is mixed in the supplied reaction vessel with reagent #1 (tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, the addition of zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample. 
As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

Details

Measurement Range

1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb

Sensitivity

< 1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb (µg/L)

Box Quantity

50

Accuracy

+/- 1.2 ppb or +/- 16% Percent

Result / Cycle Time

14 Minutes

Test Type

Arsenic


Reviews