HM Digital TDS-3 Handheld TDS Meter With Thermometer
Part Number: TDS-3
in stock
only a few left!
out of stock
Expected ship date
Please note: This item is not available for same day shipping.
Use the chat feature or give us a call at 864-284-1801 for
further information.
Please note: This item is not available for same day shipping. Use
the chat feature or give us a call at 864-284-1801 for further
information.
More expected soon
Please note: This item is not available for same day shipping. Use
the chat feature or give us a call at 864-284-1801 for further
information.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.
Feature:
- Highly efficient and accurate due to its advanced microprocessor technology.
- Hold function -- Saves measurements for convenient reading and recording, with the sound of a buzzer.
- Auto-off function -- Turns off meter after 10 minutes of non-use to conserve batteries.
- Automatic function -- After operating three minutes in the same condition,the measurement simply stops.
- High TDS Reading -- In case of measuring over 999ppm, the figure of X 10 twinkles automatically.
- Digital Thermometer -- Built-in thermometer with temp button.
- Display -- Large and easy-to-read LCD screen.
- Factory Calibrated -- Recalibration is not necessary, but can be done easily with a watch screwdriver.
Easy to Follow Instructions!
Using a clean cup or glass, take a sample of your raw feed water. Remove the protective cap from the Tester. Push the "ON" button to activate LCD display. Submerse the tester's probes into the water sample and observe for approx. 10 seconds. Record the results. Repeat the same procedure with a sample of your reverse osmosis (RO) water. If the system is new or the membrane has been replaced, do not test the first tank of RO water. The first tank of product water will contain sanitizer and possibly carbon fines from your new filters. This will cause false reading. Use the following formula to calculate the percentage of solids (TDS) that your membrane is removing:

Product Details | |
---|---|
Accuracy | ±2 % |
Max Temp (°F) | 176 |
Measurement Range | 0-9990 ppm |
Min Temp (°F) | 33 |
Power Source | 2 x 1.5V Button Cell Batteries |
Warranty & Certifications | |
Warranty | 3 Year |
Shipping Dimensions | |
Shipping Length | 10 in. |
Shipping Width | 7 in. |
Shipping Height | 4 in. |
Product Weight & Dimensions | |
Dimensions | 6.1 x 1.25 x 1" |
Product Weight (lbs) | 0.6 |
Feature:
- Highly efficient and accurate due to its advanced microprocessor technology.
- Hold function -- Saves measurements for convenient reading and recording, with the sound of a buzzer.
- Auto-off function -- Turns off meter after 10 minutes of non-use to conserve batteries.
- Automatic function -- After operating three minutes in the same condition,the measurement simply stops.
- High TDS Reading -- In case of measuring over 999ppm, the figure of X 10 twinkles automatically.
- Digital Thermometer -- Built-in thermometer with temp button.
- Display -- Large and easy-to-read LCD screen.
- Factory Calibrated -- Recalibration is not necessary, but can be done easily with a watch screwdriver.
Easy to Follow Instructions!
Using a clean cup or glass, take a sample of your raw feed water. Remove the protective cap from the Tester. Push the "ON" button to activate LCD display. Submerse the tester's probes into the water sample and observe for approx. 10 seconds. Record the results. Repeat the same procedure with a sample of your reverse osmosis (RO) water. If the system is new or the membrane has been replaced, do not test the first tank of RO water. The first tank of product water will contain sanitizer and possibly carbon fines from your new filters. This will cause false reading. Use the following formula to calculate the percentage of solids (TDS) that your membrane is removing:

Product Details | |
---|---|
Accuracy | ±2 % |
Max Temp (°F) | 176 |
Measurement Range | 0-9990 ppm |
Min Temp (°F) | 33 |
Power Source | 2 x 1.5V Button Cell Batteries |
Warranty & Certifications | |
Warranty | 3 Year |
Shipping Dimensions | |
Shipping Length | 10 in. |
Shipping Width | 7 in. |
Shipping Height | 4 in. |
Product Weight & Dimensions | |
Dimensions | 6.1 x 1.25 x 1" |
Product Weight (lbs) | 0.6 |
- Its expected shipping date is:
- Use the chat feature or give us a call at 864-284-1801 for information about when it will be available for shipping.
- This does not qualify for free shipping.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.
Please note: This item is not available for same day shipping. Use the chat feature or give us a call at 864-284-1801 for further information.