Harmsco

Harmsco® HC/90-5CPHT Hurricane High-Temp Phenolic Media Cartridge 5 mic

Part Number: HC/90-5CPHT

In Stock

out of stock

In Stock

$163.70


The Harmsco HC/90-5CPHT Hurricane High-Temp Phenolic Media Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's cellulose phenolic pleated filter media is good up to 200°F and allows for higher flow rates and lower initial pressure drop which means there are fewer cartridge changes in applications with.

Applications:
  • Hot Water Loops
  • Boiler Make-up Water
  • Petrochemical
  • Lubricating Oil
  • Cutting Fluids
  • Solvents
  • Distillate Fuel
  • Fuel Oil
  • Hydraulic Fluids
  • Bio Fuels

Specifications:
  • Pleated cellulose phenolic filter media
  • Pleated design provides longer filter life and increased particle removal
  • Aqueous and oil based fluid applications
  • Filter Dimensions: 19-1/2" x 7-3/4"
  • Max Temperature: 200°F
  • Recommended Flow Rate: 70 gpm


Weight & Dimensions

Approx Length (Inches)

19 1/2" (49.5 cm)

Details

Cap Material

Injection Molded

Capacity

As Needed

Filter Application

Sediment/Dirt/Rust

Flow Rate

70 Gallons Per Minute

Media Type

Cellulose Phenolic

Micron Rating (Nominal)

5 Micron

O Rings

Buna N

Operating Temperature Range

Max 250 Degrees Fahrenheit

Origin

USA

Outer Diameter

7-3/4"

Surface Area

90 Square Feet




The Harmsco HC/90-5CPHT Hurricane High-Temp Phenolic Media Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's cellulose phenolic pleated filter media is good up to 200°F and allows for higher flow rates and lower initial pressure drop which means there are fewer cartridge changes in applications with.

Applications:
  • Hot Water Loops
  • Boiler Make-up Water
  • Petrochemical
  • Lubricating Oil
  • Cutting Fluids
  • Solvents
  • Distillate Fuel
  • Fuel Oil
  • Hydraulic Fluids
  • Bio Fuels

Specifications:
  • Pleated cellulose phenolic filter media
  • Pleated design provides longer filter life and increased particle removal
  • Aqueous and oil based fluid applications
  • Filter Dimensions: 19-1/2" x 7-3/4"
  • Max Temperature: 200°F
  • Recommended Flow Rate: 70 gpm

Weight & Dimensions

Approx Length (Inches)

19 1/2" (49.5 cm)

Details

Cap Material

Injection Molded

Capacity

As Needed

Filter Application

Sediment/Dirt/Rust

Flow Rate

70 Gallons Per Minute

Media Type

Cellulose Phenolic

Micron Rating (Nominal)

5 Micron

O Rings

Buna N

Operating Temperature Range

Max 250 Degrees Fahrenheit

Origin

USA

Outer Diameter

7-3/4"

Surface Area

90 Square Feet


Reviews