Harmsco

Harmsco® HC/40-PM Hurricane Poly-Mesh Cartridge 250 mic

Part Number: HC/40-PM

In Stock

out of stock

In Stock

$110.51


The Harmsco HC/40-PM Hurricane Poly-Mesh Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's pleated Poly-Mesh filter media allows for higher flow rates and lower initial pressure drop which means there are fewer cartridges to change.

Specifications:
  • Pleated design for increased surface area and dirt holding capacity
  • Cleanable and reusable in most applications
  • Filter Dimensions: 9-5/8" x 7-3/4"
  • Max Flow Rate: 50 gpm
  • Max Temperature: 140°F
Applications :
  • Industrial Water Filtration
  • Water Reuse
  • Frac Water Filtration
  • Industrial Coolant Filtration
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Marine/Aquatic Filtration
  • Environmental Filtration
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

9-5/8" (24.4 cm)

Details

Cap Material

ABS

Capacity

As Needed

Case Quantity

1

Filter Application

Sediment/Dirt/Rust

Flow Rate

35 Gallons Per Minute

Max Flow Rate

50 Gallons Per Minute

Media Type

Poly-Mesh

Micron Rating (Nominal)

250 Micron

Operating Temperature Range

Max 140 Degrees Fahrenheit

Origin

USA

Outer Diameter

7-3/4"




The Harmsco HC/40-PM Hurricane Poly-Mesh Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's pleated Poly-Mesh filter media allows for higher flow rates and lower initial pressure drop which means there are fewer cartridges to change.

Specifications:
  • Pleated design for increased surface area and dirt holding capacity
  • Cleanable and reusable in most applications
  • Filter Dimensions: 9-5/8" x 7-3/4"
  • Max Flow Rate: 50 gpm
  • Max Temperature: 140°F
Applications :
  • Industrial Water Filtration
  • Water Reuse
  • Frac Water Filtration
  • Industrial Coolant Filtration
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Marine/Aquatic Filtration
  • Environmental Filtration
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

9-5/8" (24.4 cm)

Details

Cap Material

ABS

Capacity

As Needed

Case Quantity

1

Filter Application

Sediment/Dirt/Rust

Flow Rate

35 Gallons Per Minute

Max Flow Rate

50 Gallons Per Minute

Media Type

Poly-Mesh

Micron Rating (Nominal)

250 Micron

Operating Temperature Range

Max 140 Degrees Fahrenheit

Origin

USA

Outer Diameter

7-3/4"


Reviews