Harmsco

Harmsco® HC/40-50HT Premium Hurricane High-Temp Cartridge 50 mic

Part Number: HC/40-50HT

In Stock

out of stock

In Stock

$128.30


Harmsco HC/40-50HT Premium Hurricane High-Temp Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's Polyester-Plus pleated filter media is good up to 200°F and allows for higher flow rates and lower initial pressure drop which means there are fewer cartridge changes in applications with.

Specifications:
  • Pleated Polyester-Plus filter media
  • Pleated design provides longer filter life and increased particle removal
  • Aqueous and oil based fluid applications
  • Filter Dimensions: 9-5/8" x 7-3/4"
  • Max Temperature: 200°F
  • Recommended Flow Rate: 35 gpm

Applications:
  • Hot Water Loops
  • Boiler Make-up Water
  • Petrochemical
  • Lubricating Oil
  • Cutting Fluids
  • Solvents
  • Distillate Fuel
  • Fuel Oil
  • Hydraulic Fluids
  • Bio Fuels
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

9-5/8" (24.4 cm)

Details

Cap Material

Injection Molded

Capacity

As Needed

Filter Application

Sediment/Dirt/Rust

Flow Rate

35 Gallons Per Minute

Media Type

Pleated Polyester

Micron Rating (Nominal)

50 Micron

O Rings

Buna N

Operating Temperature Range

Max 200 Degrees Fahrenheit

Origin

USA

Outer Diameter

7-3/4"

Surface Area

40 Square Feet




Harmsco HC/40-50HT Premium Hurricane High-Temp Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's Polyester-Plus pleated filter media is good up to 200°F and allows for higher flow rates and lower initial pressure drop which means there are fewer cartridge changes in applications with.

Specifications:
  • Pleated Polyester-Plus filter media
  • Pleated design provides longer filter life and increased particle removal
  • Aqueous and oil based fluid applications
  • Filter Dimensions: 9-5/8" x 7-3/4"
  • Max Temperature: 200°F
  • Recommended Flow Rate: 35 gpm

Applications:
  • Hot Water Loops
  • Boiler Make-up Water
  • Petrochemical
  • Lubricating Oil
  • Cutting Fluids
  • Solvents
  • Distillate Fuel
  • Fuel Oil
  • Hydraulic Fluids
  • Bio Fuels
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

9-5/8" (24.4 cm)

Details

Cap Material

Injection Molded

Capacity

As Needed

Filter Application

Sediment/Dirt/Rust

Flow Rate

35 Gallons Per Minute

Media Type

Pleated Polyester

Micron Rating (Nominal)

50 Micron

O Rings

Buna N

Operating Temperature Range

Max 200 Degrees Fahrenheit

Origin

USA

Outer Diameter

7-3/4"

Surface Area

40 Square Feet


Reviews