Harmsco

Harmsco® HC/40-50 Premium Hurricane Polyester Cartridge 50 mic

Part Number: HC/40-50

In Stock

out of stock

In Stock

$79.64


The Harmsco HC/40 Premium Hurricane Polyester Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's pleated Polyester-Plus filter media allows for higher flow rates and lower initial pressure drop which means there are fewer cartridges to change.

Features:
  • Pleated design for increased surface area and dirt holding capacity
  • End caps, center tube and media are thermally bonded for added strength
  • Filter Dimensions: 9-5/8" x 7-3/4"
  • Max Temperature: 140°F
  • Certified to ANSI/NSF 61
Applications:
  • Reverse Osmosis Pre-filtration
  • Desalination Pre-filtration
  • Industrial Water Filtration
  • Marine/Aquatic Filtration
  • Industrial Coolant Filtration
  • Municipal Drinking Water Filtration
  • Commercial/Residential Drinking Water
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Food and Beverage Filtration
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

9-5/8" (24.4 cm)

Details

Capacity

As Needed

Case Quantity

1

Filter Application

Sediment/Dirt/Rust

Media Type

Pleated Polyester

Micron Rating (Nominal)

50 Micron

Operating Temperature Range

140 Degrees Fahrenheit

Outer Diameter

7-3/4"

Warranty & Certifications

Certifications

NSF 61




The Harmsco HC/40 Premium Hurricane Polyester Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's pleated Polyester-Plus filter media allows for higher flow rates and lower initial pressure drop which means there are fewer cartridges to change.

Features:
  • Pleated design for increased surface area and dirt holding capacity
  • End caps, center tube and media are thermally bonded for added strength
  • Filter Dimensions: 9-5/8" x 7-3/4"
  • Max Temperature: 140°F
  • Certified to ANSI/NSF 61
Applications:
  • Reverse Osmosis Pre-filtration
  • Desalination Pre-filtration
  • Industrial Water Filtration
  • Marine/Aquatic Filtration
  • Industrial Coolant Filtration
  • Municipal Drinking Water Filtration
  • Commercial/Residential Drinking Water
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Food and Beverage Filtration
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

9-5/8" (24.4 cm)

Details

Capacity

As Needed

Case Quantity

1

Filter Application

Sediment/Dirt/Rust

Media Type

Pleated Polyester

Micron Rating (Nominal)

50 Micron

Operating Temperature Range

140 Degrees Fahrenheit

Outer Diameter

7-3/4"

Warranty & Certifications

Certifications

NSF 61


Reviews