Harmsco HC/170-20HT Premium Hurricane High-Temp Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's Polyester-Plus pleated filter media is good up to 200°F and allows for higher flow rates and lower initial pressure drop which means there are fewer cartridge changes in applications with.
Specifications:
- Pleated Polyester-Plus filter media
- Pleated design provides longer filter life and increased particle removal
- Aqueous and oil based fluid applications
- Filter Dimensions: 30-3/4" x 7-3/4"
- Max Temperature: 200°F
- Recommended Flow Rate: 105 gpm
- Hot Water Loops
- Boiler Make-up Water
- Petrochemical
- Lubricating Oil
- Cutting Fluids
- Solvents
- Distillate Fuel
- Fuel Oil
- Hydraulic Fluids
- Bio Fuels
Weight & Dimensions
Approx Length (Inches) | 30-3/4" (78.1 cm) |
Details
Cap Material | Injection Molded |
Capacity | As Needed |
Filter Application | Sediment/Dirt/Rust |
Flow Rate | 105 Gallons Per Minute |
Media Type | Pleated Polyester |
Micron Rating (Nominal) | 20 Micron |
O Rings | Buna N |
Operating Temperature Range | Max 200 Degrees Fahrenheit |
Origin | USA |
Outer Diameter | 7-3/4" |
Surface Area | 170 Square Feet |
Harmsco HC/170-20HT Premium Hurricane High-Temp Cartridge provides longer filter runs for fewer change-outs resulting in a lower overall operating cost. The filter's Polyester-Plus pleated filter media is good up to 200°F and allows for higher flow rates and lower initial pressure drop which means there are fewer cartridge changes in applications with.
Specifications:
- Pleated Polyester-Plus filter media
- Pleated design provides longer filter life and increased particle removal
- Aqueous and oil based fluid applications
- Filter Dimensions: 30-3/4" x 7-3/4"
- Max Temperature: 200°F
- Recommended Flow Rate: 105 gpm
- Hot Water Loops
- Boiler Make-up Water
- Petrochemical
- Lubricating Oil
- Cutting Fluids
- Solvents
- Distillate Fuel
- Fuel Oil
- Hydraulic Fluids
- Bio Fuels
Weight & Dimensions
Approx Length (Inches) | 30-3/4" (78.1 cm) |
Details
Cap Material | Injection Molded |
Capacity | As Needed |
Filter Application | Sediment/Dirt/Rust |
Flow Rate | 105 Gallons Per Minute |
Media Type | Pleated Polyester |
Micron Rating (Nominal) | 20 Micron |
O Rings | Buna N |
Operating Temperature Range | Max 200 Degrees Fahrenheit |
Origin | USA |
Outer Diameter | 7-3/4" |
Surface Area | 170 Square Feet |