Harmsco

Harmsco® 931-10 29-1/4" Premium Pleated Filter 10 mic

Part Number: 931-10

Alt. Part Number: 931-10W

In Stock

out of stock

In Stock

$28.61


Harmsco 931 Series are highly efficient filter cartridges made of pleated Polyester-Plus filter media for low pressure drop, high flow capability, increased contaminant removal, long filter runs, reusability, and the lowest cost per gallon filtered.

Features:
  • Pleated design with up to 50% more surface area than competitive filters resulting in superior performance and increased contaminant removal
  • Longer filtration runs for fewer change-outs and less maintenance
  • Low pressure drop
  • Thermally bonded for longer usable life
  • Recommended Flow Rate: 18 gpm
  • FDA approved materials - NSF 61 certified
  • Engineered media for superior performance
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.


Weight & Dimensions

Approx Length (Inches)

29 1/4" (74.3 cm)

Case Dimensions

2-3/4" O.D.; 1-1/16" I.D.

Details

Cap Material

Plastisol (Pliable PVC)

Capacity

As Needed

Cartridge Style

Drop-In

Case Quantity

24

End Cap Type

DOE

Filter Application

Sediment/Dirt/Rust

Flow Rate

4-6 Gallons Per Minute; 18 Gallons Per Minute

Media Type

Pleated Polyester

Micron Rating (Nominal)

10 Micron

Operating Temperature Range

Max 140 Degrees Fahrenheit

Origin

USA

Outer Diameter

2.75"

Surface Area

18 Square Feet

Warranty & Certifications

Certifications

NSF 61




Harmsco 931 Series are highly efficient filter cartridges made of pleated Polyester-Plus filter media for low pressure drop, high flow capability, increased contaminant removal, long filter runs, reusability, and the lowest cost per gallon filtered.

Features:
  • Pleated design with up to 50% more surface area than competitive filters resulting in superior performance and increased contaminant removal
  • Longer filtration runs for fewer change-outs and less maintenance
  • Low pressure drop
  • Thermally bonded for longer usable life
  • Recommended Flow Rate: 18 gpm
  • FDA approved materials - NSF 61 certified
  • Engineered media for superior performance
Disclaimer: Harmsco® is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and Fresh Water Systems, Inc. of any nature whatsoever.

Weight & Dimensions

Approx Length (Inches)

29 1/4" (74.3 cm)

Case Dimensions

2-3/4" O.D.; 1-1/16" I.D.

Details

Cap Material

Plastisol (Pliable PVC)

Capacity

As Needed

Cartridge Style

Drop-In

Case Quantity

24

End Cap Type

DOE

Filter Application

Sediment/Dirt/Rust

Flow Rate

4-6 Gallons Per Minute; 18 Gallons Per Minute

Media Type

Pleated Polyester

Micron Rating (Nominal)

10 Micron

Operating Temperature Range

Max 140 Degrees Fahrenheit

Origin

USA

Outer Diameter

2.75"

Surface Area

18 Square Feet

Warranty & Certifications

Certifications

NSF 61


Reviews