The Goulds Water Technology Multi-Stage Booster Pump is a high pressure booster pump ready to take on your difficult commercial or residential pumping issue. The GB booster pump series provides quiet vibration free operation, while ensuring reliable high pressure service. This pump features a cast iron casing, 1.5 HP motor, and VITON mechanical seal. The motor can run up to 3500 RPM and uses 1" NPT Suction x 1" NPT Discharge connections.
NOTE: Pumps used on open spray applications must be plugged into electrical service which is protected by a Ground Fault Service Interruptor. Failure to do so may result in serious personal injury or death and property damage.
Applications:
Additional Features:
NOTE: Pumps used on open spray applications must be plugged into electrical service which is protected by a Ground Fault Service Interruptor. Failure to do so may result in serious personal injury or death and property damage.
Applications:
- Residential or Commercial Systems
- Agricultural Pressure Washing
- Reverse Osmosis
- Evaporative Colling Systems
- Booster Systems
- Spray Systems
- Water Circulation
- Filtration
- HVAC
- Farm Systems
Additional Features:
- O-ring Casing Seal
- Mechanical Seal to ensuring safety
- Fixed Impeller Design
- Voltage: 110/220V
Weight & Dimensions
Approx Height (Inches) | 5-3/4 Inches |
Approx Length (Inches) | 27-1/8 Inches |
Approx Width (Inches) | 6-1/16 Inches |
Details
Flow Rate | 3 - 16 GPM |
Inlet Size | 1" MPT |
Liquid Temperature | 160 Degrees Fahrenheit |
Origin | USA |
Outlet Size | 1" MPT |
Power | 1.5 hp |
Voltage | 220VAC, 115VAC |
Inlet Pressure | 75 PSI |
Motor Rpm | 3500 Rotations Per Minute |
Suction Lift | 10 ft. |
Max Head Pressure | 560 ft. (242 PSI) |
Warranty & Certifications
Warranty | 1 year |
The Goulds Water Technology Multi-Stage Booster Pump is a high pressure booster pump ready to take on your difficult commercial or residential pumping issue. The GB booster pump series provides quiet vibration free operation, while ensuring reliable high pressure service. This pump features a cast iron casing, 1.5 HP motor, and VITON mechanical seal. The motor can run up to 3500 RPM and uses 1" NPT Suction x 1" NPT Discharge connections.
NOTE: Pumps used on open spray applications must be plugged into electrical service which is protected by a Ground Fault Service Interruptor. Failure to do so may result in serious personal injury or death and property damage.
Applications:
- Residential or Commercial Systems
- Agricultural Pressure Washing
- Reverse Osmosis
- Evaporative Colling Systems
- Booster Systems
- Spray Systems
- Water Circulation
- Filtration
- HVAC
- Farm Systems
Additional Features:
- O-ring Casing Seal
- Mechanical Seal to ensuring safety
- Fixed Impeller Design
- Voltage: 110/220V
Weight & Dimensions
Approx Height (Inches) | 5-3/4 Inches |
Approx Length (Inches) | 27-1/8 Inches |
Approx Width (Inches) | 6-1/16 Inches |
Details
Flow Rate | 3 - 16 GPM |
Inlet Size | 1" MPT |
Liquid Temperature | 160 Degrees Fahrenheit |
Origin | USA |
Outlet Size | 1" MPT |
Power | 1.5 hp |
Voltage | 220VAC, 115VAC |
Inlet Pressure | 75 PSI |
Motor Rpm | 3500 Rotations Per Minute |
Suction Lift | 10 ft. |
Max Head Pressure | 560 ft. (242 PSI) |
Warranty & Certifications
Warranty | 1 year |
Documentation