Home / Water Filtration Systems / Flow Controls & Restrictors / External Flow Control - 1000ml/min for 100 gpd
Hydronamic Engineering

External Flow Control - 1000ml/min for 100 gpd

Part Number: FR-1000-JG
Your price:

Flow Controls (aka Flow Restrictors) are required for all RO systems and must be properly sized to the membrane capacity, typically 3-4 parts brine (drain water) to 1 part permeate (product water). The FR-1000-JG is simple to install - just push the 1/4" tube firmly into the quick connectors.

  • 1/4" QC x 1/4" QC
  • Quick and easy installation
  • RO Membrane Flow Rate: 100 GPD
  • Drain Flow Rate: 1000 ml/min
  • Rinse Ratio: approximately 3.4:1 (drain:RO)
NOTE: To optimize the efficiency and performance of the RO system, we recommend the installation of a Permeate Pump.

California residents Prop 65 Warning
This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov