Everpure Helia Designer Series Faucet - Brushed Stainless

The Everpure Helia Designer Series Faucet for the Helia Chiller/Instant-Hot drinking water appliance, delivers chilled and hot filtered water from a single spout. Exclusively designed to be used with the Helia Home & Office Water Chiller/Instant-Hot to perfectly compliment today’s kitchens.

Features:

Sleek, dual handle design
Solid stainless steel construction
Spring Loaded Hot Water Sately Handle
Hot & Cold marked Handles
Insulated heat-resistant spout
Aerator tip provides even, clear stream of filtered water
0.5 GPM flow
Lead-free
Ceramic disc type valve
RO compatible with the use of the Twin Inlet Dual Air Gap

Note: The Exubera & Helia products can not be sold in California.Consumer Alert: The manufacturer's "Step By Step Install & Setup Guide" depicts the black tube of the Helia faucet as the hot tube, and natural tube as the chilled tube. In fact, this is reversed. The natural, or clear tube is the hot tube.

California residents Prop 65 Warning

WARNING!

This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Product Details
Base Size	2-1/8"
Faucet Type	Non Air Gap Drinking Water
Hole Size	1"
Material Of Construction	Stainless Steel
Max Counter Thickness	2-1/8"
Max Flow Rate	0.5 GPM
Max Pressure (Psi)	90
Max Temp (°F)	212
Min Pressure (Psi)	20
Min Temp (°F)	50
Reach	4-1/4"
Color / Finish	Stainless Steel Brushed Stainless
Origin	Taiwan
Warranty & Certifications
Warranty	3 years on the finish and 5 years for workmanship defects.
Shipping Dimensions
Shipping Length	21 in.
Shipping Width	10 in.
Shipping Height	8 in.
Product Weight & Dimensions
Product Height	9-7/8"
Product Weight (lbs)	4.75

Everpure Helia Designer Series Faucet - Brushed Stainless Manual