Home / Water Filtration Systems / Reverse Osmosis Systems / Everpure EV9975-54 EZ-RO System - 200 GPD w/16 Gal Hydropneumatic Tank
Everpure Commercial

Everpure EV9975-54 EZ-RO System - 200 GPD w/16 Gal Hydropneumatic Tank

Part Number: EV9975-54
Your price:
The Everpure EV9975-54 EZ-RO System uses Reverse Osmosis (RO) to reduce Total Dissolved Solids (TDS); it provides up to 200 gal/day (757 L/day) and includes a 16-gallon (60.6 L) hydropneumatic tank. Ideal for applications where RO is necessary to meet manufacturer’s warranty requirements.

Features:
  • Meets combi oven and steamer equipment water quality standards; known to significantly reduce scale and corrosion problems due to high TDS, water hardness, and chlorides.
  • 4CM cartridge provides optimal mineral content for proper function of conductivity sensors on steam equipment
  • Non-electric design operates on available water pressure
  • Sealed hydropneumatic storage tank provides capacity and pressurized water to downstream equipment
  • Compact design allows installation under counters and in tight spaces 
  • Pressure gauge allows monitoring of RO inlet pressure and prefilter condition
  • Built-in bypass, sample port and flush valves speed up installation and cartridge replacement
  • Proprietary Fibredyne™ II filtration media effectively inhibits growth of bacteria on the filter media that can decrease product life. Also can reduce sediment and chlorine to help protect the RO membrane
  • High flow 1/2" ID hose optimized water line to equipment
  • Installation kit comes complete with tubing, fittings, and mounting hardware for installation
  • High efficiency RO membrane saves up to two times more water than standard RO membranes
  • Numerous patents pending on blending technology and other aspects of the product design

          Specifications:
          • Inlet Connection: 3/8" push-to-connect
          • Outlet Connection: 1/2" OD push-to-connect; 3/4" garden hose connection included
          • Pressure Range: 50 - 100 psi (3.5 - 6.9 bar), non-shock
          • Water Temperature: 40 - 100°F (4 - 38°C)


          Installation Tips

          • Feed water connection to system - should be COLD only. Tempered water up to 80°F (26.6°C) can be used.
          • Do not exceed system specifications for temperature and pressure.
          • Provide a dedicated feed water supply connection of at least 3/8" inner diameter. 
          • For use with steam generation only. Do not use for condensate or wash water
          • Allow 3" clearance below system for filter cartridge removal and replacement.
          • Detailed, illustrated installation guide is included with each system.
          California residents Prop 65 Warning
          WARNING!
          This product contains materials known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov