• HydroBlend™. The SS-10 features the Hydroblend™ compound, which is a unique blend that inhibits mineral scale deposits and provides corrosion protection in low flow water-fed equipment. HydroBlend is unaffected by high temperatures unlike standard scale control additives like polyphosphates. The SS-10's patented design dispenses a controlled amount of HydroBlend™ for long-term protection and greater effectiveness of other standard treatments.
• Operation Recommendations. Pre-existing scale in your equipment is possible which may come loose and clog the equipment. Please remove any loose scale before installing the ScaleStck SS-10. Deliming your equipment prior to use is recommended, but it is not required. It is best practice to inspect the ScaleStick cartridge every 6 months. The SS-10 should be replaced before the HydroBlend™ is completely dissolved.
• NSF Certified. This filter has been certified by NSF International to meet NSF/ANSI Standard 42 for material requirements only. 

• 1 10" Scale Stick

• 1 NP 10” Standard Housing w/PR 3/4 FPT Blk / Clear

• 1 Mounting Bracket for STD housings

• 2 Male adapters 3/4 CTS x 3/4 NPT

• 1 Housing Wrench 

• 4 Screws to mount cap on the bracket

• Teflon Tape

Installation Precautions:

• Install on cold water line only. Maximum temperature for the housing and ScaleStick is 100F

• Do not install where the unit could freeze

• Maximum pressure is 90 psi

• Scale Stick is good for flow rates up to 6 gpm