Liquatec
9-7/8" x 2-3/4" Liquatec SPF Pleated - 1 mic
This item is discontinued. We recommend the Neo-Pure PH-27097-01 9-3/4" High Efficiency Pleated Filter 1 micron as a substitute.
Specifications:
- Polyester media is chemical and bacteria resistant
- Cleanable (reusable) on cartridges 5 microns and up
- Pleated media has more surface area providing:
- Greater dirt holding capacity
- Lower pressure drop
- Extended filter life
- Pleated media has a polypropylene core for added strength
- Vinyl plastisol ends fuse components together into a unified end cap and gasket
Weight & Dimensions
Weight (lbs) | 0.6 |
Approx Length (Inches) | 9-7/8" |
Details
Max Temp (°F) | 125 |
Min Temp (°F) | 40 |
Cap Material | Vinyl-Plastisol |
Capacity | As Needed |
Cartridge Style | Drop-In |
Case Quantity | 40 |
End Cap Type | Double Open Ended (DOE) |
Filter Application | Sediment/Dirt/Rust |
Flow Rate | 10 GPM |
Initial Pressure Drop | 1 PSI Differential |
Inner/Outer Wraps | Polypropylene |
Media Type | Polyester |
Micron Rating (Nominal) | 1 µm |
Netting | Polypropylene |
Outer Diameter | 2-3/4" |
The Liquatec SPF Series Polyester Pleated filter cartridges out-perform wound, spun, melt blown, resin bonded and other "depth" type filter elements because the pleated media creates more surface area for increased capacity. The 100% polyester filter media creates additional savings with extended filter life, since cartridges 5 micron and up are cleanable.
Specifications:
- Polyester media is chemical and bacteria resistant
- Cleanable (reusable) on cartridges 5 microns and up
- Pleated media has more surface area providing:
- Greater dirt holding capacity
- Lower pressure drop
- Extended filter life
- Pleated media has a polypropylene core for added strength
- Vinyl plastisol ends fuse components together into a unified end cap and gasket
NOTE: This item is discontinued. We recommend the Neo-Pure PH-27097-01 9-3/4" High Efficiency Pleated Filter 1 micron as a substitute.
Weight & Dimensions
Weight (lbs) | 0.6 |
Approx Length (Inches) | 9-7/8" |
Details
Max Temp (°F) | 125 |
Min Temp (°F) | 40 |
Cap Material | Vinyl-Plastisol |
Capacity | As Needed |
Cartridge Style | Drop-In |
Case Quantity | 40 |
End Cap Type | Double Open Ended (DOE) |
Filter Application | Sediment/Dirt/Rust |
Flow Rate | 10 GPM |
Initial Pressure Drop | 1 PSI Differential |
Inner/Outer Wraps | Polypropylene |
Media Type | Polyester |
Micron Rating (Nominal) | 1 µm |
Netting | Polypropylene |
Outer Diameter | 2-3/4" |
Documentation
