GE Water

9-7/8" Purtrex Sediment Depth Filter - 75 Mic (PX75-9 7/8)

Part Number: 93110

Alt. Part Number: 1193110, PX75-9 7/8, PX75-10

In Stock

out of stock

In Stock

$3.99

The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal. 
The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps. 
Features:
  • Lower density at the surface of the filter with progressively higher density towards the center
  • Contains no wetting agents, solvents, antistatic agents or binders
  • Meets the requirement of the FDA for food and beverage contact
  • Long filter life
  • Superior dirt holding capacity
  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine Filtration


Weight & Dimensions

Approx Length (Inches)

9-7/8" (25.1 cm)

Details

Capacity

As Needed

Cartridge Style

Drop-In

Case Quantity

40

End Cap Type

DOE

Filter Application

Sediment/Dirt/Rust

Media Type

Polypropylene

Micron Rating (Nominal)

75 Micron

Outer Diameter

2.5"

Inner Diameter

1 Inches

Warranty & Certifications

Certifications

NSF 42


9-7/8"




The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal. 
The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps. 
Features:
  • Lower density at the surface of the filter with progressively higher density towards the center
  • Contains no wetting agents, solvents, antistatic agents or binders
  • Meets the requirement of the FDA for food and beverage contact
  • Long filter life
  • Superior dirt holding capacity
  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine Filtration

Weight & Dimensions

Approx Length (Inches)

9-7/8" (25.1 cm)

Details

Capacity

As Needed

Cartridge Style

Drop-In

Case Quantity

40

End Cap Type

DOE

Filter Application

Sediment/Dirt/Rust

Media Type

Polypropylene

Micron Rating (Nominal)

75 Micron

Outer Diameter

2.5"

Inner Diameter

1 Inches

Warranty & Certifications

Certifications

NSF 42

Documentation
9-7/8"

Reviews