GE Water

4-7/8" Purtrex Sediment Depth Filter - 5 Mic (PX05-4 7/8)

Part Number: 93007

Alt. Part Number: PX05-4 7/8, 1193007

In Stock

out of stock

In Stock

$2.63

The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal.

Features:
  • Lower density at the surface of the filter with progressively higher density towards the center
  • Contains no wetting agents, solvents, antistatic agents or binders
  • Meets the requirement of the FDA for food and beverage contact
  • Long filter life
  • Superior dirt holding capacity
  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine Filtration
NOTE: The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps.


Compatible with:
Ametek155030-43, P5-478, 93007

Weight & Dimensions

Length (inches)

5

Height (inches)

2.5

Width (inches)

2.5

Weight (lbs)

0.0125

Details

Capacity

As Needed

Cartridge Style

Drop-In

Case Quantity

80

End Cap Type

Double Open Ended (DOE)

Filter Application

Sediment/Dirt/Rust

Media Type

Polypropylene

Micron Rating (Nominal)

5 µm

Outer Diameter

2-1/2"

Inner Diameter

1"

Warranty & Certifications

Certifications

NSF 42


4-7/8"




The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. The filter incinerates to trace ash for easy disposal.

Features:
  • Lower density at the surface of the filter with progressively higher density towards the center
  • Contains no wetting agents, solvents, antistatic agents or binders
  • Meets the requirement of the FDA for food and beverage contact
  • Long filter life
  • Superior dirt holding capacity
  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine Filtration
NOTE: The Purtrex Sediment Depth Filters are available in a 1, 3, 5, 10, 20, 30, 50, and 75 micron levels and 9-3/4", 9-7/8", 10", 19-1/2", 20", 29-1/4", 30", 40", and 50" lengths, and various end caps.


Compatible with:
Ametek155030-43, P5-478, 93007

Weight & Dimensions

Length (inches)

5

Height (inches)

2.5

Width (inches)

2.5

Weight (lbs)

0.0125

Details

Capacity

As Needed

Cartridge Style

Drop-In

Case Quantity

80

End Cap Type

Double Open Ended (DOE)

Filter Application

Sediment/Dirt/Rust

Media Type

Polypropylene

Micron Rating (Nominal)

5 µm

Outer Diameter

2-1/2"

Inner Diameter

1"

Warranty & Certifications

Certifications

NSF 42

Documentation
4-7/8"

Reviews