- The HF30 Replacement Filter was formerly labeled as Aqua-Pure HF30.
- For Single High Flow Carbonator Dispensers under standard water conditions.
- Certified by NSF to Standard 53 for cyst reduction
- NSF Standard 42 and/or FDA CFR-21 compliant materials
- Reduction of sediment and abrasive hard particles helps prevent equipment wear and helps extend the life of pumps, valves, o-rings and seals.
3M™ Water Filtration Products is formerly known as CUNO Incorporated. CUNO Incorporated was previously divided into CUNO Food Service, Aqua-Pure, and CUNO OCS.
Weight & Dimensions
Approx Length (Inches) | 10-1/2" (26.7 cm) |
Details
Capacity | 14,000 Gallons, 6 to 12 Months |
Cartridge Style | Twist-Off |
Case Quantity | 6 |
Filter Application | Sediment/Dirt/Rust, Chlorine/Taste/Odor, Cyst |
Flow Rate | 1.67 Gallons Per Minute |
Initial Pressure Drop | 125 PSI Differential |
Media Type | Carbon Block |
Micron Rating (Nominal) | 0.5 Micron |
Operating Temperature Range | 100 Degrees Fahrenheit |
Origin | Made in the USA with US and Foreign Components |
Outer Diameter | 4" |
Warranty & Certifications
Certifications | NSF 42; NSF 53 |
Features:
- The HF30 Replacement Filter was formerly labeled as Aqua-Pure HF30.
- For Single High Flow Carbonator Dispensers under standard water conditions.
- Certified by NSF to Standard 53 for cyst reduction
- NSF Standard 42 and/or FDA CFR-21 compliant materials
- Reduction of sediment and abrasive hard particles helps prevent equipment wear and helps extend the life of pumps, valves, o-rings and seals.
3M™ Water Filtration Products is formerly known as CUNO Incorporated. CUNO Incorporated was previously divided into CUNO Food Service, Aqua-Pure, and CUNO OCS.
Weight & Dimensions
Approx Length (Inches) | 10-1/2" (26.7 cm) |
Details
Capacity | 14,000 Gallons, 6 to 12 Months |
Cartridge Style | Twist-Off |
Case Quantity | 6 |
Filter Application | Sediment/Dirt/Rust, Chlorine/Taste/Odor, Cyst |
Flow Rate | 1.67 Gallons Per Minute |
Initial Pressure Drop | 125 PSI Differential |
Media Type | Carbon Block |
Micron Rating (Nominal) | 0.5 Micron |
Operating Temperature Range | 100 Degrees Fahrenheit |
Origin | Made in the USA with US and Foreign Components |
Outer Diameter | 4" |
Warranty & Certifications
Certifications | NSF 42; NSF 53 |
Documentation