Pentek

20" Pentek 255669-43 Activated Carbon / Electroplating 7 Mic Cartridge

Part Number: 255669-43

In Stock

out of stock

In Stock

$20.50

The Pentek 255669-43 (ELPC-20) Carbon/Electroplate cartridge is an economical solution for general-purpose water filtration needs.

Specifications:
  • Fits in standard and slimline 20" water filter housings
  • Well suited for a wide range of residential applications
  • Nominally rated at 7 microns
  • Cellulose-free construction
  • Resistant to chemical breakdown in both acidic and alkaline solutions up to 180°F (82°C)
  • Will not contribute to plating porosity or brittleness
  • Integrated post-filtration layer to ensure that no carbon fines are bled into the plating bath
  • End cap gaskets are permanently molded on to the end caps to ease filter cartridge change-out (gaskets cannot fall into the filter housing during installation or removal of filter)




Weight & Dimensions

Weight (lbs)

2.97

Approx Length (Inches)

20" (50.8 cm)

Details

Max Temp (°F)

180

Min Temp (°F)

-40

Cap Material

Polypropylene

Capacity

6 Months

Filter Application

Sediment/Dirt/Rust, Chlorine/Taste/Odor

Initial Pressure Drop

3.4 psi @ 2 gpm PSI Differential

Gaskets

Santoprene

Media Type

Advanced GAC

Micron Rating (Nominal)

7 µm

Netting

Polypropylene

Outer Diameter

2-7/8"


20"




The Pentek 255669-43 (ELPC-20) Carbon/Electroplate cartridge is an economical solution for general-purpose water filtration needs.

Specifications:
  • Fits in standard and slimline 20" water filter housings
  • Well suited for a wide range of residential applications
  • Nominally rated at 7 microns
  • Cellulose-free construction
  • Resistant to chemical breakdown in both acidic and alkaline solutions up to 180°F (82°C)
  • Will not contribute to plating porosity or brittleness
  • Integrated post-filtration layer to ensure that no carbon fines are bled into the plating bath
  • End cap gaskets are permanently molded on to the end caps to ease filter cartridge change-out (gaskets cannot fall into the filter housing during installation or removal of filter)



Weight & Dimensions

Weight (lbs)

2.97

Approx Length (Inches)

20" (50.8 cm)

Details

Max Temp (°F)

180

Min Temp (°F)

-40

Cap Material

Polypropylene

Capacity

6 Months

Filter Application

Sediment/Dirt/Rust, Chlorine/Taste/Odor

Initial Pressure Drop

3.4 psi @ 2 gpm PSI Differential

Gaskets

Santoprene

Media Type

Advanced GAC

Micron Rating (Nominal)

7 µm

Netting

Polypropylene

Outer Diameter

2-7/8"

Documentation
20"

Reviews