Watts LPSOV Leak Protector and Shut-Off Valve

Watts LPSOV Leak Protector and Shut-Off ValveShow Picture 1Show Picture 2Show Picture 3
Mouse over to view larger image.
You might like:

Options
$14.35
Qty:  

Watts LPSOV Leak Protector and Shut-Off Valve


The Watts LPSOV Leak Protector is more than just a leak detector. When the LPSOV detects that there is a leak, the adsorbent pad inside the leak protector expands to close the valve. This shuts off the water flow and stops the leak.

This kit includes: Three (3) total adsorbent pads: one already in the leak detector, and two in a replacement pack. We offer more Replacement Adsorbent Pads in two (2) Packs if needed.



System Add-On
For use with under counter reverse osmosis and drinking systems.



Detects Leaks
Shuts off flow in the event a leak should occur protecting your equipment.



Easy Installation
Simply steps to install or replace the protector and pads.



Novel and Effective Technology. The patented device is novel, but quite simple. When a leak occurs, the adsorbent applicator “tablet” expands to close the valve and shut off the incoming water supply.
Cost-Effective Investment. For less than $20, you can ensure that you will not suffer from damaged property due to a leak.

CAUTION: Keep Leak Protector Replacement Cartridges (pads) out of the reach of children.


Specification Sheets & Manuals



Disclaimer: Watts® is a registered trademark of Watts Water Technologies, Inc, which is not affiliated or otherwise associated with Fresh Water Systems, Inc. or this site. Fresh Water Systems, Inc acknowledges and confirms that it has not been granted any license or authority from Watts Water Technologies, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Watts Water Technologies, Inc. and Fresh Water Systems, Inc. of any nature whatsoever.

Certifications
Dimensions
1 detector, 3 replacement pads
4 x 3 x 3 "
1.6 oz.
Materials of Construction
Filter Life
Filter Type
Filter Specifications
1/4" QC, 3/8" QC
Watts
Operating Conditions
100 psi
Maximum ambient humidity: 70% °F
Mouse over for more information.

ACCESSORIES