Fresh Water Systems

3/8" OD LLDPE Polyethylene Tubing

Part Number: LLDPE6-BLACK

Alt. Part Number: TUB6

In Stock

out of stock

In Stock

$0.39

3/8" OD LLDPE Polyethylene Tubing is produced in Linear Low-Density Polyethylene (LLDPE) for cold and intermittent hot water applications such as beverage dispensing, potable water or pneumatic applications. Our tubing is made from FDA compliant materials and is NSF International Standard 51 & 61 certified. Our tubing provides excellent resistance to environmental stress cracking as measured by ASTM D-1693.

NOTE: This listing is for tubing sold by the foot. For greater savings please see our listing for the full 500-foot roll of tubing. Any length of tubing that is less than a full coil must be custom cut and is non-returnable. Only complete, unaltered coils may be returned.

Important Information: LLDPE tubing is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. LLDPE tubing is suitable for pneumatic applications providing pressure is maximum 150 psi @ 70º F. At elevated temperatures 120º F+, mineral oil will degrade LLDPE tubing should be periodically checked and replaced if necessary.

Details

Max Temp (°F)

150

Max Pressure (Psi)

230

Application

Potable Water, Water/Beverage Dispensing, Pneumatic

Color / Finish

Black, Blue, Green, Natural, Red, White, Orange

Material Of Construction

Polyethylene

Outer Diameter

3/8"

Inner Diameter

1/4"

Max Chlorine Content

4 ppm

Warranty & Certifications

Certifications

NSF Std 51 & 61



3/8" OD LLDPE Polyethylene Tubing is produced in Linear Low-Density Polyethylene (LLDPE) for cold and intermittent hot water applications such as beverage dispensing, potable water or pneumatic applications. Our tubing is made from FDA compliant materials and is NSF International Standard 51 & 61 certified. Our tubing provides excellent resistance to environmental stress cracking as measured by ASTM D-1693.

NOTE: This listing is for tubing sold by the foot. For greater savings please see our listing for the full 500-foot roll of tubing. Any length of tubing that is less than a full coil must be custom cut and is non-returnable. Only complete, unaltered coils may be returned.

Important Information: LLDPE tubing is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. LLDPE tubing is suitable for pneumatic applications providing pressure is maximum 150 psi @ 70º F. At elevated temperatures 120º F+, mineral oil will degrade LLDPE tubing should be periodically checked and replaced if necessary.

Details

Max Temp (°F)

150

Max Pressure (Psi)

230

Application

Potable Water, Water/Beverage Dispensing, Pneumatic

Color / Finish

Black, Blue, Green, Natural, Red, White, Orange

Material Of Construction

Polyethylene

Outer Diameter

3/8"

Inner Diameter

1/4"

Max Chlorine Content

4 ppm

Warranty & Certifications

Certifications

NSF Std 51 & 61


Reviews