Reverse Osmosis Sanitizing Maintenance Kit The Reverse Osmosis Sanitizing Maintenance Kit provides EPA approved sanitizer with a 10cc sanitizer syringe for thorough cleaning of RO tanks. The Sani System liquid concentrate sanitizer is also NSF...View Details
HM Digital TDS-3 Handheld TDS Meter With Thermometer The HM Digital TDS-3 handheld water quality tester enables you to determine just how good or bad your water really is! These testers accurately measure the TDS level in your water. Ideal for...
Tank Pressure Gauge Over time, the bladder of your tank will lose air pressure. This will cause your system to operate incorrectly. Use a Tank Pressure Gauge to monitor the air pressure in your RO bladder tank. Measures from 0 to 20 psi (pounds...
SQC3 Head Assembly: Replacement manifold head assembly for the SQC3 RO System Filters not included ( 47-55706 , 66-4706 and 47-55710 ) Decorative shroud not included ( 85-1650 ) Includes: 1/4" John Guest feed inlet, 3/8" John Guest tank outlet...
The Cellulose Tri-Acetate (CTA) membrane used in the SQC1 systems (66-4603G2) has been discontinued. You can simply replace the CTA membrane with the TFC membrane and the correct prefilter listed in the chart above. TFC membranes are recommended due to their superior performance. TFC membranes also provides additional benefits:
Greater Reduction of Contaminants
More Water Production
Better for Low Pressure Applications
NOTE: The G2 on the end of filter part numbers (ex: 44-55706G2) only designates these filters have been labeled for Water Factory Systems, as these same filters are used for three different brand named systems (Water Factory Systems, CoolerMate, and FaucetMate), all made by CUNO.