Selex Depth Filters


Products


GE Selex 1231663 Filter 9-3/4" 5 mic PolypropyleneGE Selex 1231663 Filter 9-3/4
Part Number: 1231663
Alternate Part Number: SXD-93/4-YYP
<!--__blank__-->
  • Length: 9-3/4" (24.8 cm)
  • Outer Diameter: 2.5"
  • Filter Media: Thermally Bonded Polypropylene
  • Capacity: 6-12 months
  • Filter Application: Sediment/Dirt/Rust
  • Micron Rating (Nominal): 5 µm
View Details
$18.67 

Qty:  

Compare

GE Selex 97153 Filter 9-7/8" 1 mic PolypropyleneGE Selex 97153 Filter 9-7/8
Part Number: 97153
Alternate Part Number: SXE-9 7/8-YYP
<!--__blank__-->
  • Length: 9-7/8" (25.1 cm)
  • Outer Diameter: 2.5"
  • Filter Media: Thermally Bonded Polypropylene
  • Capacity: 6-12 months
  • Filter Application: Sediment/Dirt/Rust
  • Micron Rating (Absolute): 1 µm
View Details
$29.98 

Qty:  

Compare

GE Selex SXE-20-YPP Filter 20" 1 mic Polypropylene (97165)GE Selex SXE-20-YYP Filter 20
Part Number: 97165
Alternate Part Number: SXE-20-YYP
<!--__blank__-->
  • Length: 20" (50.8 cm)
  • Outer Diameter: 2.5"
  • Filter Media: Thermally Bonded Polypropylene
  • Capacity: 6-12 months
  • Filter Application: Sediment/Dirt/Rust
  • Micron Rating (Absolute): 1 µm
View Details
$50.20 - $953.80

View Details

Compare

The Selex (SX) cartridge filter is a high precision graded density cartridge constructed of 100% pure polypropylene. Selex provides a very high particle retention efficiency that equates the performance of absolute rated filters. The patented Selex manufacturing process controls the density and fiber size, which are key to the filter’s performance and long life. Selex cartridge filters have sharp efficiency cutoff, fast rinse up for exceptional purity, and continuous, weld free lengths up to 40 inches (101.6 cm).

Typical Applications

  • Magnetic Media (CMP) - solvents, slurry/dispersion, Pre-Filter and Final Filter at Coater
  • Photographic - Incoming Water, Liquid Chemicals, Developer, Fixer, Stopper Solutions
  • Petrochemicals - Waterflood, Completion, Enhanced Oil Recovery, Amines
  • Chemical Process Industry - Reagent Grade Chemicals, Process Water

The table below contains ordering information. To configure a standard Selex filter with no adapters on either end, select one item from each of the first three columns. Your model number may look like this: SXD-29 1/4.
To order Selex filters with end adapters, add one item from the last 2 columns to your filter selection (use all 6 columns). Your model number may look like this: SXD-29 1/4 YYP (see example below) or SXD-29 1/4 XK.